• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

advance my cams

  • Thread starter Thread starter Ironstang98
  • Start date Start date Jul 13, 2005
I

Ironstang98

New Member
Jul 13, 2005
6
0
1
Jul 13, 2005
#1
  • Jul 13, 2005
  • #1
hi eveyrone! I just want to introduce myself, I have a 98 mustang with an 05 explorer motor all aluminum. I just installed the comp 270 and have ptv. I need to know how to advance or retard my cams... How can i do it? do i need some other cam gears.. any help would be greatly appreciated.

Thank you
 
9

97gtblue

New Member
Apr 11, 2005
283
0
0
pensacola,florida
Jul 13, 2005
#2
  • Jul 13, 2005
  • #2
im guessing you need some gears .. i was ognna do that to my 97 but dont feel like spending the 200 bucks right now..not sure if its the same for you rmotor
 
I

Ironstang98

New Member
Jul 13, 2005
6
0
1
Jul 13, 2005
#3
  • Jul 13, 2005
  • #3
97gtblue said:
im guessing you need some gears .. i was ognna do that to my 97 but dont feel like spending the 200 bucks right now..not sure if its the same for you rmotor
Click to expand...


Where do i get the gears. Who sells them?
Thanx for your answer
 
9

97gtblue

New Member
Apr 11, 2005
283
0
0
pensacola,florida
Jul 13, 2005
#4
  • Jul 13, 2005
  • #4
not sure exactly havent did much resaerch on them i just went to a local speed shop
 
I

Ironstang98

New Member
Jul 13, 2005
6
0
1
Jul 13, 2005
#5
  • Jul 13, 2005
  • #5
Is there a difference between non pi cam gears and pi cam gears?
 
R

Red2000GT

Founding Member
Sep 10, 2000
2,450
0
46
Regina,Sask.Canada
Jul 14, 2005
#6
  • Jul 14, 2005
  • #6
No difference except that some 99 and 2000 2V motors used press on gears and the rest used bolt on. All aftermarket cams(as you've found out) use bolt on. There are a few companies making adjustable cam sprockets but you may need to have the pistoms fly cut for clearance. (I speak from experience)
 
I

Ironstang98

New Member
Jul 13, 2005
6
0
1
Jul 14, 2005
#7
  • Jul 14, 2005
  • #7
Red2000GT said:
No difference except that some 99 and 2000 2V motors used press on gears and the rest used bolt on. All aftermarket cams(as you've found out) use bolt on. There are a few companies making adjustable cam sprockets but you may need to have the pistoms fly cut for clearance. (I speak from experience)
Click to expand...


would you happen to know what companies would make the adjustable cam gears? and off the top of your head would you know what they go for?
 
You must log in or register to reply here.

Similar threads

My next project , a 428 build!
  • horse sence
  • Jul 29, 2026
  • Classic Mustang Specific Tech
  • 9 10 11
Replies
213
Views
5K
Classic Mustang Specific Tech Wednesday at 6:44 PM
DadLife0724
C
98 gt fuel pressure issues
  • chasecollier1984
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
185
SN95 4.6L Mustang Tech Jun 2, 2026
chasecollier1984
C
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
768
Other Auto Tech Jul 13, 2026
General karthief
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
386
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?