AFR 165's heads and FTI custom cam

a lot of people get very good gains with an h/c/i swap. like 60+ i'd say but i wouldn't really know since i'm basically stock for the moment

60-80 seems like a conistent range with the right intakes.

Check out my sig for mods and numbers. Track times need a lot of work.

Jake

Jake is not in the "typical" results band though. His is ~150HP over stock flywheel numbers.

The 60-80HP I posted is what I have seen in RWHP numbers.

yeah, it is totally impossible to really guess power levels from a H/C/I swap. Especially with an FTI setup because every cam is going to be different. Therefore yielding different peak numbers. But you must remember, that it is not PEAK numbers that make a fast car. People who know there stuff will agree that its the area under the curve that really matters.

Anthony

I put up my chart in the last day or so if you want to see what I guess would be described as typical results with a AFR/FTI combo.

Not on my pc at the moment or I would put it up for you but just look back a day or two if you wish.

Better yet, just do a search and you can see all of the AFR/FTI charts.

Later
Grady

Id say with exhaust performer intake fti cam and afrs 290 RWHP is almost a given unless something is messed up on your car

check out airflowresearch.com , they have a 95 gt with an automatic that they do their testing with. click on the dyno testing section and they show rwhp with heads alone and with other goodies without a cam. it's pretty impressive.