Just installed a set of AFR 185's with a spring upgrade along with a set of stud mounted Ford roller rockers. The clearance between the springs and the underside of the rocker is minimal and possibly making contact on a few of them. Has anyone else had this same setup with similar problems? If so, what was the fix? I figure a set of longer pushrods should give me the added clearance needed.
Also, I have never had a set of stud mounted rockers before. I installed the rockers according to the directions, zero lash, tighten set screw, torque nut. Is this the best way?
Also, I have never had a set of stud mounted rockers before. I installed the rockers according to the directions, zero lash, tighten set screw, torque nut. Is this the best way?