• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Air Core question

  • Thread starter Thread starter NewToFord
  • Start date Start date Nov 19, 2008
N

NewToFord

Member
Oct 7, 2008
318
1
19
CT
Nov 19, 2008
#1
  • Nov 19, 2008
  • #1
I have all of the underhood of my car stripped down. I am going to be welding and smoothing out the engine compartment. My last step is the air core, not the condenser, the core in the dash. I am doing an a/c delete. I have read how to take the core out, loosen the dash, and remove the heater box. But heres my question, to save me alot of work, can I just cut the 2 pipes that go to the air core, and weld a plate over the hole. I just figure this will save me the nightmare of ripping the dash and etc apart. Also there is almost no weight savings with the air core. In another words, pull the piece of rubber out of the firewall, stick a dremel or something in a few inches, cut the pipes, and weld a plate across. I will be leaving the heater core, because I do want heat. thanks for the advice.
 

satanas

Member
Dec 16, 2005
156
3
19
Arizona
Nov 19, 2008
#2
  • Nov 19, 2008
  • #2
I did that to my car I cut the pipes off then I welded a sheet of metal i kept my heater. Be carefull because when I cut my pipes i guess it still had some of the fumes and there was a small fire in the mustang. I felt so stupid, I thought it was going to explode. So I threw in the first thing I had close by (which it was a 20 oz soda..... BUt it turned off ..
 
N

NewToFord

Member
Oct 7, 2008
318
1
19
CT
Nov 21, 2008
#3
  • Nov 21, 2008
  • #3
when I weld the plate flat to the cowl, do I have to worry about a fire then with the rubber?
 
You must log in or register to reply here.

Similar threads

Engine Bleeding air in the heater core
  • keel
  • Apr 2, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
385
Fox 5.0 Mustang Tech Apr 23, 2026
limp
F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Sep 7, 2026
Kleinjj27
K
B
A/C Issues
  • Boats90GT
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
199
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2026
Mcmahst
D
Engine Coolant and Radio Issues
  • Don7Up
  • Sep 14, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
810
Fox 5.0 Mustang Tech Oct 4, 2025
Don7Up
D
M
  • Locked
2001 evap core tube support
  • mnky99
  • Sep 4, 2025
  • SN95 V6 Mustang Tech
Replies
4
Views
451
SN95 V6 Mustang Tech Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?