I recently got an alignment. Anyone with input on these specs I appreciate your help. I have H&R SS springs, bilstein HD struts/shocks, steeda 4 bolt c/c plates.
I brought the car in after putting the 18x9 FR500s with kuhmo ecsta MX tires on the front. The toe was noticably out on both sides, and it was bothering me. I got the car aligned, but it seems as if the drivers side wheel is perfectly straight, and the passenger side wheel is STILL toed out. This is with the steering wheel perfectly straight.
I have the spec sheet. It reads:
Left Right
Camber -1.7, -1.7
Caster 5.1, 4.8
Toe .11, .04
Why is the toe on the right (passenger side) so different than the left? It seems liek the toe needs to be the same. Why would the shop leave it like that (even though the toe is within ford specs- .00-.25)
Any ideas?
I brought the car in after putting the 18x9 FR500s with kuhmo ecsta MX tires on the front. The toe was noticably out on both sides, and it was bothering me. I got the car aligned, but it seems as if the drivers side wheel is perfectly straight, and the passenger side wheel is STILL toed out. This is with the steering wheel perfectly straight.
I have the spec sheet. It reads:
Left Right
Camber -1.7, -1.7
Caster 5.1, 4.8
Toe .11, .04
Why is the toe on the right (passenger side) so different than the left? It seems liek the toe needs to be the same. Why would the shop leave it like that (even though the toe is within ford specs- .00-.25)
Any ideas?