• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

ALL SMOG EQUIPMENT REMOVED - now what for vacume?

  • Thread starter Thread starter SpencB
  • Start date Start date Jun 10, 2004
S

SpencB

New Member
May 31, 2003
388
0
0
Ontario, Canada
Jun 10, 2004
#1
  • Jun 10, 2004
  • #1
What are your thoughts on power brakes and how much will they be affected with air pump removed as far as lost vacume etc. What did you guys do with the lines that were left.... what did you cap and how much effect did removing the air pump, air tube to the intermediate pipe, and plugging the back of the heads have on your power brakes?

Thanks
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,945
224
Massachusetts
Jun 10, 2004
#2
  • Jun 10, 2004
  • #2
SpencB said:
What are your thoughts on power brakes and how much will they be affected with air pump removed as far as lost vacume etc. What did you guys do with the lines that were left.... what did you cap and how much effect did removing the air pump, air tube to the intermediate pipe, and plugging the back of the heads have on your power brakes?

Thanks
Click to expand...

The brakes draw vacuum from the motor, not the air pump. Taking it off will not affect them at all.

I capped the ports on the back of my heads (forget what size plug) and then completely removed everything smog related. Air pump, all the lines, the tube to the H-pipe, the solenoids on the pass strut tower and capped the two lines running to it. Car runs the same, engine bay looks way cleaner
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Jun 10, 2004
#3
  • Jun 10, 2004
  • #3
5L5 is spot on; disconnecting the air pump correctly will have no impact whatsoever on the power brakes. The two systems have nothing to do with each other. The air pump injects air (excess oxygen) into the exhaust system so the catalytic converters will have the extra oxygen needed to catalyze chemical reactions which change NOx, unburned HC and CO into harmless CO2, N2 and H20. All you need is vacuum from the intake to run the power brakes.
 
S

SpencB

New Member
May 31, 2003
388
0
0
Ontario, Canada
Jun 10, 2004
#4
  • Jun 10, 2004
  • #4
Well, that is what I figured, thanks for the reasurance.....

There was just one air line? that I was concerned with and it ran from down low just after the smog pump ( towards the firewall) onto the top of one of the valves up to the collector of air lines up by the passenger fender well. That I haven't cap'd or plugged and the other line I left to the EGR for now....
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,945
224
Massachusetts
Jun 10, 2004
#5
  • Jun 10, 2004
  • #5
There should be two....a white and a black one. The both run to the back of the passenger side strut tower
 
9

92GreenGT

PEAT
Founding Member
Jul 18, 2002
2,085
1
46
Big Stone Gap, VA
Jun 10, 2004
#6
  • Jun 10, 2004
  • #6
Ok, I have a question about this. I capped the line running from the intake to the charcoal canister off. I unplugged the purge valve solenoid. I forgot about it and just layed it down, I had the hood up the next day and had the car running and that thing had power on it and it was sparking. Do I just need to cut the plug off and tape it up or what should I do? Also, the vaccum lines the go down to the smog lines comming off the pump, what should you plug them with? There is like 4 or 5 that broke on me and now that im not using the pump anymore I need to cap them off. I broke one that goes to the EGR valve, with me having a blower all those lines that are broke are they making me lose power becuase of vaccum leaks? Thanks

Dave
 
S

SpencB

New Member
May 31, 2003
388
0
0
Ontario, Canada
Jun 10, 2004
#7
  • Jun 10, 2004
  • #7
well, the 'junction' in my bay was more down on the strut tower and mid way from the strut tower to the side of the block. There's a junction there with I think 4 small air lines running into a white adapter clip housing. It's a spiders nest of a mess at best and part reason I started tearing shyt out of there L!
 
9

92GreenGT

PEAT
Founding Member
Jul 18, 2002
2,085
1
46
Big Stone Gap, VA
Jun 11, 2004
#8
  • Jun 11, 2004
  • #8
TTT

Dave
 
You must log in or register to reply here.

Similar threads

D
Engine 85 GT Backfires through Carb
  • DienstXIV
  • Oct 3, 2025
  • Fox 5.0 Mustang Tech
Replies
19
Views
718
Fox 5.0 Mustang Tech Oct 7, 2025
85GTStangGuy
Engine Popping noise in the intake. Frustrated still.
  • esteban31065
  • Apr 6, 2025
  • Fox 5.0 Mustang Tech
Replies
15
Views
1K
Fox 5.0 Mustang Tech May 23, 2025
gkomo
I
Engine What Aluminum Heads???
  • Iceman1998
  • Sep 8, 2024
  • Fox 5.0 Mustang Tech
Replies
19
Views
2K
Fox 5.0 Mustang Tech Sep 15, 2024
Noobz347
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
190
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
S
Timing chain, guides and tensioner installation (Possible orientation in Intake Stroke)
  • StallionMax
  • Sep 21, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
400
SN95 4.6L Mustang Tech Sep 24, 2025
StallionMax
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?