The reason I ask is, in my opinion that doesnt seem to be a safe place to put it. If you have ever had a tire shread and I have, that would put it in the line of fire from the tire.
I just need to get my hood pin issue resolved(with yours and emay's help)and get my SHR louvers in and that will nearly complete my mods...at least for the big dollar ones...for a little while Saving up for taxes I owe and the big week long trip out west in Sept
The reason I ask is, in my opinion that doesnt seem to be a safe place to put it. If you have ever had a tire shread and I have, that would put it in the line of fire from the tire.
If you have a forward rotating tire blow out and take out that line lock solenoid, you are having far more problems than solenoid damage. It's in the same location as the original stock rubber brake lines passage. So if this solenoid were taken out via tire failure, then if it were stock so would have been the brake line anyway, so it's a moot point.
If you have a forward rotating tire blow out and take out that line lock solenoid, you are having far more problems than solenoid damage. It's in the same location as the original stock rubber brake lines passage. So if this solenoid were taken out via tire failure, then if it were stock so would have been the brake line anyway, so it's a moot point.
Right. Not to mention the fact that the solenoid is very solid. You're not in any more danger than if you didn't have the line locks there. Change the soft line out for a braided line, and you'll be even more safe. I hope to get that done before fall.
If all else fails, that's what the eBrake is for. That's why, even with an auto, you should park with the eBrake on every once in a while, to keep it from seizing, in case you one day need to use it.