Another one bites the dust..

stangGT97 · Sep 19, 2006

jstreet for president!

jstreet0204 · Sep 19, 2006

stangGT97 said:
jstreet for president!

Dan_Soprano · Sep 19, 2006

BennyBlown2v said:
....and if you wanna replace a bone stock motor in there make it DOHC

DropTopPony · Sep 19, 2006

That sucks !!!!

Now are these spun bearings a result of the stock oil pump not flowing enough with the upgraded cams etc...maybe we should all be upgrading to the FRPP/Cobra/MMR oil pump when it time for cams/heads etc. This is like the 10th post on a spun bearing on a under 300rwhp car in like the last month i have seen on the forums. I have a new high flow pump going in with the new shortblock but i'm not assembling it myself because these bearings and tight tolerances scare me.

helty · Sep 19, 2006

Twista said:
Tell helty i love his "12 reasons i hate SLP" video

thanks

I have a video of the damage, well the sound anyway. I'll post it up in a bit.

Wanna hear how jasons day is going? First he ****s his motor, which is bad enough. Then I let him borrow the Red Dragon (since I have two stangs ) and he gets rear ended in my car while Im at work The damage is minimal, in fact I had trouble telling there was anything wrong with it tonight. Im sure in the daylight it will be worse, but it wont cost much to fix. Just paint abrasions, no real body damage. FUnny thing is he said the front of the car that hit him was F'd. Ford Tough

Superhereaux · Sep 19, 2006

Twista said:
Tell helty i love his "12 reasons i hate SLP" video

Tell that girl in your avatar i love her

to the original poster, send me your rims and i'll see what i can do

hotmustang331 · Sep 19, 2006

WOW, Man sorry to hear that Jason

. Man I would have NEVER guessed that would happen.

Mines been running strong with over 25,000 miles of 6200RPM shifts and beating on it like EVERY time I drive it. Man, that seriously sucks .

I wonder if your oil pump started going south and starved the bearings? Like said, these bearings ususally just dont spin...the need a reason. I doubt your oil gauge would say anything...you would have to have almost 0 pressure before that darn thing moves.
Remeber (forgot his screen name) spun a bearing while just driving normally when his blower oil line came loose...no engine warnings and gauge showing normal.
Im betting your oil pump took a dive or half way did and just starved the bearings....thats just one of those possabilitys you know, nothing you could do but replace it. Good luck, and let me know if you need anything.

helty · Sep 19, 2006

hey, did anyone read my post? That ******* wrecked my car! Im the victim here! Give ME the internet attention!

View attachment 439314

hotmustang331 · Sep 19, 2006

Poor Jason

san~man · Sep 19, 2006

helty said:
hey, did anyone read my post? That ******* wrecked my car! Im the victim here! Give ME the internet attention!

View attachment 439304

Ah man, cry me a river. You only got paint damage, and he got a spun bearing

No warranty on the car?

helty · Sep 19, 2006

hotmustang331 said:
Poor Jason

you know after listening to THIS:

http://www.youtube.com/watch?v=eKVhmUytZu8

again, Im not gonna argue. sucks too, we were planning a trip to a REAL 1/4 MILE track next month Its ok though, now he'll get a built motor and make big POWA!

Pennywise2 · Sep 19, 2006

Sorry to hear you spun a bearing that sucks Jason.

Right after you installed your cams too wow.
Hopefully their is no damage done to your block so,
you can rebuild it.Hope you don't have to buy a new
engine that would really be a drag.It can happen to
anyone at anytime.Will you be walking to work and school?

bgrd351 · Sep 19, 2006

Oh...that sound...make me want to ....

well maybe it will be a blessing in disguise and you can come back stronger

jasonh_86 · Sep 19, 2006

Thanks for the replies guys.

I have no idea how it happened tho.. I am kinda anxious to find out tho. I am now possibly looking at just getting an MMR 600 shortblock and bolting my heads/cams to it since i'll be doing a forged shortblock sooner or later.. might as well do it now instead of spending $1900 on a used motor

I'm still driving helt's car. He's the best friend a guy could have. You guys don't understand how thankful of this guy!

Oh yeah... Helt.. That vid just brought tears to my eyes

helty · Sep 19, 2006

jasonh_86 said:
Oh yeah... Helt.. That vid just brought tears to my eyes

thats what you get for hurting the dargon.

Keep your chin up, take out a loan, and get that MMR 600....ante up a few bones for that cobra crank too

jasonh_86 · Sep 19, 2006

helty said:
thats what you get for hurting the dargon.

Keep your chin up, take out a loan, and get that MMR 600....ante up a few bones for that cobra crank too

Thanks for the words Helt! I can't tell you how much I appreciate all of your help so far.. you're the greatest!!

I won't be making the October trip to Memphis now, unless I ride with somebody. I'm just so scared of driving a car very hard.. I have no desire to beat on a car for a while, even tho that's not what caused my car's demise

helty · Sep 19, 2006

you can make it up to me by voting for the bullitt for VOTM on synergy, and nobody else

jasonh_86 · Sep 19, 2006

helty said:
you can make it up to me by voting for the bullitt for VOTM on synergy, and nobody else

Will do

I'll make it up to you man.. I owe you BIG TIME

Stang|ess · Sep 20, 2006

helty said:
you can make it up to me by using ky next time. when you don't, it makes me go raw

sell me your heads jason <3.

TangerineGT96 · Sep 20, 2006

CRAP!!!!!!!

this sucks man whatever you wanna do im behind you all the way

Another one bites the dust..

New Member

Active Member

Noob Slayer

some Ukrainian's enjoying a handjob via my credit

chicks make me feel inadequate

Active Member

some Ukrainian's enjoying a handjob via my credit

Active Member

O-G

some Ukrainian's enjoying a handjob via my credit

Banned

Member

I

some Ukrainian's enjoying a handjob via my credit

I

some Ukrainian's enjoying a handjob via my credit

I

seeking cyber partner(s)

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency