Any idea on how to remove rust spots on fuel rail?

[str8stang036]

I have tiny rust spots all over my fuel rails. I have tried fine sanding, and something else that I cant remember. Any of guys had luck using anything else?

 

[94GTLaserRC]

I would say the scotch brite-type wheels for the dremmel would do the job, but I dont for sure!
RC

 

[str8stang036]

Do yours look like that?

 

[94GTLaserRC]

Dont know..I guess Ill find out in a couple of weeks!
RC

 

[RIO5.0]

Take some Mothers metal polish, and fine steel wool...give it a rub down and that should cure it....its stainless steel, so hopefully its not pitted....i give mine a douche in that stuff everytime i can get at it....

 

[RIO5.0]

Mothers or any metall polish should have it looking like this....stainless normally cleans up decent....same as the stock tails will...

 

[str8stang036]

Looks good man!! I just sanded it down and it real smooth but the spots are still there. Oh well

 

[94GTLaserRC]

I forgot about the steel wool.. If you were here Jose, I would give you some.. I have a package of fine pads.

RC

 

[FastmanGT]

I would say try some that Nevr-Dull stuff, it took rust off of a knife I had found in my garage. Should come in a can that looks like this...

 

[tmoss]

The three fuel rails I've worked on have been chromed steel. You can use Lime-away it will chemically remove the rust and not leave scratches in the chrome. I then take spray rust converter and wet a q-tip and treat the rust spots so they don't rust again.

 

[88GtHoe]

Try some steel wool. That $hit works wonders on surface rust and chrome. It also adds an amazing shine to the chrome and wont scratch it.