• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Anybody ever use the car lifters for the garage ?

  • Thread starter Thread starter 66moneypit
  • Start date Start date May 31, 2005
6

66moneypit

Member
Dec 28, 2004
536
0
17
Northern Va
May 31, 2005
#1
  • May 31, 2005
  • #1
Just wondered if anyone here has used the car lifters that you see advertised in some of the car magazines. If you did use one...what height was the garage and what size car did you put under it. I am considering getting one instead of expanding my garage at home. I have to measure it again but I think the height of the garage...floor to ceiling will be 10 ft maybe 10.5 feet.
 
F

firepig

New Member
May 8, 2003
32
0
0
Phoenix AZ area
Jun 1, 2005
#2
  • Jun 1, 2005
  • #2
If you're talking about a drive up on to lift, I have a Park lift that was very reasonably priced and put everything on it from my 67 Mustangs to my Expedition with no problems.

Basically do the math on your height. Look at how high the advertised lift goes, add the full height of the tallest vehicle you plan to put under and on it and see if you have any roof left.

My ceiling is 14 feet high, so that wasn't a problem. You should be ok with the 10' ceiling because you rarely if ever would need to raise it all the way, and you only need about 5 feet underneath to park the average car. Width shouldn't be a problem.
 
R

Roddster67

Founding Member
Jun 27, 2001
134
0
0
Lake Forest, CA.
Jun 1, 2005
#3
  • Jun 1, 2005
  • #3
I think pabear has the type of lift you are referring to.
 
6

66moneypit

Member
Dec 28, 2004
536
0
17
Northern Va
Jun 1, 2005
#4
  • Jun 1, 2005
  • #4
firepig said:
If you're talking about a drive up on to lift, I have a Park lift that was very reasonably priced and put everything on it from my 67 Mustangs to my Expedition with no problems.

Basically do the math on your height. Look at how high the advertised lift goes, add the full height of the tallest vehicle you plan to put under and on it and see if you have any roof left.

My ceiling is 14 feet high, so that wasn't a problem. You should be ok with the 10' ceiling because you rarely if ever would need to raise it all the way, and you only need about 5 feet underneath to park the average car. Width shouldn't be a problem.
Click to expand...

I realized my wording could have been more descriptive. I definitely have to do the math and see if it will work out. I can't add on to my garage because of homeowners associations and this is cheaper anyway. Do they have any redundant safety measures etc ?
 
D

dwells

New Member
May 8, 2003
24
0
0
Phoenix area
Jun 5, 2005
#5
  • Jun 5, 2005
  • #5
Do you mean from collapsing on the car underneath, or worse, you?

Yes, they have safety latches at all four corners.
 

TBP

Founding Member
Nov 14, 2000
681
0
16
Transient
Jun 5, 2005
#6
  • Jun 5, 2005
  • #6
You could check this company out if you don't want a full blown lift.

http://www.kwiklift.com/
 
6

66moneypit

Member
Dec 28, 2004
536
0
17
Northern Va
Jun 5, 2005
#7
  • Jun 5, 2005
  • #7
s-code said:
You could check this company out if you don't want a full blown lift.

http://www.kwiklift.com/
Click to expand...

I checked them out but I want the full lift. Trying to make that two car garage hold THREE .
 
You must log in or register to reply here.

Similar threads

Anyone have a car lift in a garage?
  • limp
  • Feb 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
573
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 7, 2025
hoopty5.0
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
3
Views
149
Other Auto Tech May 31, 2026
LILCBRA
Y
Engine 1994 Ford Mustang Gt Rod Knock/Stuck Lifter
  • yaboity
  • Jun 7, 2025
  • 1994 - 1995 Specific Tech
Replies
2
Views
279
1994 - 1995 Specific Tech Jun 8, 2025
AeroCoupe
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
531
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Tightening upper control arm bushings at ride height dilemma… need some help
  • AnthonyA1234
  • Dec 27, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
5K
Fox 5.0 Mustang Tech Feb 27, 2025
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?