ANYONE HAS QUAD SHOCKS>?

hollywoodstang

Active Member
May 23, 2006
1,095
2
36
does anyone has quad shocks?

will it rub against the shocks? when i put 255/40/17 tires with 17x9 in the back???:shrug:

anyone know? and i do not want wheel hop due to removing the quad shocks.:nono:

I want to keep the quads or get a equipment that will prevent from wheel to hop when i take the quads out.

does anyone know the solution? or the wheels will just fit fine with quad in the back???

thanks fellas
 
They might fit, depends on your backspacing etc. Someone else can answer better. If you do end up removing the quads. You will need a decent set of lower control arms, and possibly uppers. Maximum motorsports makes good quality stuff, a set of their lca's should work for you.
 
I know of people with 275/40/17s on the rear with no rubbing on the Quads. I would keep them on at all costs, you can flip them for some added tire clearance.
 
Mine were already flipped before I obtained the car. Previous owner had a set of 255/60/R15's on there - practically friggin' truck tires! Amazingly, they're the original quads and they still work just fine with almost a quarter of a million miles on 'em. Then again, the roads out here aren't rough at all, so maybe that's helped 'em wear more gently...

My prior '89 notch had quads that were just beat all to heck at 109k and I had MAD wheel-hop until I installed a PROPER set of quads (not those crappy Monroe shocks they try to sub in, they're not valved properly - had to search for a set of Gabriels). Kept things from bouncing around henceforth, and seemed to make for better wet-weather traction.