Anyone running M/T ET Street RADIALS?

P

Pyros

New Member

Sep 13, 2003

17

0

0

Aug 19, 2005

#1

• Aug 19, 2005

• #1

I just picked up a pair moutned and balanced for when I go to the track. I only plan on using them on track days.

My question is I'm afraid to get caught in rain on the way back up when I go, how bad are these in wet conditions? I know the ET Streets are a nightmare, what about the radials?

Thanks,
Chris

 

Venom_Nitrous

Founding Member

Aug 23, 2002

416

1

0

Spearfish, SD

Aug 19, 2005

#2

• Aug 19, 2005

• #2

I have the 275/50/15 on my car and they hook like you can't imagine. My CF DF clutch slips before they do. They are BAD in the rain but not unusuable. If there is water on the road, no more than 40 mph. It will just float and fishtail. I have only had my tires for 300 miles and yesterday I ran a nail through them and ruined one completely. I run them at 7-10 psi.

 

P

Pyros

New Member

Sep 13, 2003

17

0

0

Aug 19, 2005

#3

• Aug 19, 2005

• #3

what do you do for a burnout? back into the water box, move forward, pop the clutch at like 6000?


thanks!
Chris

 

Venom_Nitrous

Founding Member

Aug 23, 2002

416

1

0

Spearfish, SD

Aug 19, 2005

#4

• Aug 19, 2005

• #4

I have never been to the track on them. On the street with eibach drag-launch springs, I can launch at 5000 with an quick cluch engagement and not even hear a chirp. I pulled .96 G's on my D-pic guage.

 

P

Pyros

New Member

Sep 13, 2003

17

0

0

Aug 19, 2005

#5

• Aug 19, 2005

• #5

wow that's nuts... are you running a stock rearend except for the 3.73's?? I'd be afraid to snap an axle...

 

Venom_Nitrous

Founding Member

Aug 23, 2002

416

1

0

Spearfish, SD

Aug 20, 2005

#6

• Aug 20, 2005

• #6

Yes sir I am running stock rear. Also I have the stock shocks and dampers. It is a MEAN MEAN combo - the springs and shocks.

 

Venom_Nitrous

Founding Member

Aug 23, 2002

416

1

0

Spearfish, SD

Aug 20, 2005

#7

• Aug 20, 2005

• #7

.

 

speed545

Member

Mar 21, 2003

458

1

18

Montreal, canada

Aug 20, 2005

#8

• Aug 20, 2005

• #8

Pyros said:

wow that's nuts... are you running a stock rearend except for the 3.73's?? I'd be afraid to snap an axle...

Click to expand...

M\T DR are my next mod but i m also afraid to snap an axle. I have stock rear end except for 4.10. My auto tranny might save my rear end though considering i m not launching at hight RPM.

 

P

Pyros

New Member

Sep 13, 2003

17

0

0

Aug 20, 2005

#9

• Aug 20, 2005

• #9

well the stock axles held up.. thx for the info venom.

i didn't launch higher than 3000, and i was getting TOO much traction and bogging down. best 60' was a 2.019. if i wasn't bogging, it would have been 1.8's easily. i didn't want to launch any higher and risk snapping an axle, so its all good.

 

damacman

Member

Aug 12, 2003

529

0

16

Phoenix, AZ

Aug 21, 2005

#10

• Aug 21, 2005

• #10

search "snapped axle" or "broken axle" on StangNet . . . you won't feel so comfortable any more . . .

 

P

Pyros

New Member

Sep 13, 2003

17

0

0

Aug 21, 2005

#11

• Aug 21, 2005

• #11

never said i was comfortable, just glad it didn't break yesterday I'm thinking of just upgrading the stock axles to moser 28 splines, anyone have any ideas about these?