Anyone Sell Fabricated Valve Covers To Clear Stud Mount Rockers?

[killer5.0]

if not does anyone know if the fabricated ones i see on ebay and everywhere else clear stud mounts? i have a custom set of anderson ford motorsport ones but with my baffle they dont clear my new setup which is stud mount. love the look of the fabricated ones but dont want to shell out if they dont clear...

 

[Boosted92LX]

Just look for "tall" sbf valve covers. They are designed to clear roller rockers, and in most cases, stud girdles as well.


https://m.summitracing.com/parts/sum-440625

 

[srtthis]

i got the ones off Ebay for like 75 bucks and they clear mine with the girdle and all

and if the rails arent flat i'll have them milled square.

 

[GroverDill]

Just know tall covers usually mean intake spacers and non stock hood.

Unless you run an elbow

 

[srtthis]

or a carb

 

[Noobz347]

I run stud mounted RR under the stock covers with the baffle removed.

 

[hoopty5.0]

Just know tall covers usually mean intake spacers and non stock hood.

Unless you run an elbow

And an 8.2 deck

 

[FoxMustangLvr]

if not does anyone know if the fabricated ones i see on ebay and everywhere else clear stud mounts? i have a custom set of anderson ford motorsport ones but with my baffle they dont clear my new setup which is stud mount. love the look of the fabricated ones but dont want to shell out if they dont clear...

Some people double up their VC gaskets

 

[Boosted92LX]

I run stud mounted RR under the stock covers with the baffle removed.

That's what I'm doing. Stock covers with chopped baffles. The passenger side catch can does great. The driver side just gave me problems due to location of the bung.

I did buy the thick gaskets. I think they are around 3/8 thick.