Anyone using D&D tubular a arms?

[DFRESH]

Anyone using front tubular a arms from http://dynamicracingproducts.com/mustand-ddmotorsports.asp ? The price looks good. I emailed them for more info. I am open to suggestions for affordable tubular a arms. Thanks,
Doug

 

[blown1989saleen]

Ive been running the complete D&D tubular front end kit since Sept 01' and im very happy with it.

 

[DFRESH]

Scott,
Are the a arms the same dimensions as stock? No fitment issues? What type of bushings do they use? Are they press in ball joints or screw in? They don't have much info on the website and picture is small. Thanks,
Doug

 

[2002whitegt]

Scott,
Are the a arms the same dimensions as stock? No fitment issues? What type of bushings do they use? Are they press in ball joints or screw in? They don't have much info on the website and picture is small. Thanks,
Doug

Hey I just finished installing the complete front system, but haven't had any seat time, the a-arms use polyurathane bushings so they are going to squeak a little,and the ball joints are screw in and you are going to have to go with a coilover conversion. Sorry that the pic is not that good but you can see the a-arm a little better

View attachment 518618

Mario

 

[DFRESH]

Are they already set up for coil over shocks or do you have to modify them? Thanks again,
Doug

 

[2002whitegt]

Are they already set up for coil over shocks or do you have to modify them? Thanks again,
Doug

There ready coilovers, you just drop the spindle on like on this pic

View attachment 518606

And everything bolts right in