• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum

Anyway to stay up with a 2003 cobra. using a 2001 cobra?

  • Thread starter Thread starter BlakeGT
  • Start date Start date May 3, 2005
B

BlakeGT

New Member
Jul 8, 2004
99
0
0
Missouri
May 3, 2005
#1
  • May 3, 2005
  • #1
Is it possible to stay up with a 2003 Cobra, using bolt ons on my 2001 Cobra? I plan on spraying but i want to be able to keep up with them before i spray. Hope this makes sense. My current mods are: Predator Programmer, MAc Prochamber, K&N CAI, Flowmaster Catback, 4:10 gears. What else do i need ?? will shorty headers do anything??

Thanks!!
 
1

1996COBRA

Founding Member
Aug 30, 2000
360
0
0
dallas
May 3, 2005
#2
  • May 3, 2005
  • #2
Not with equal drivers. Your best bet is a short distance race, from a dig (1/8mi.), even then you'll need traction, and it will still be a handful. That being said, there are plenty of '03 out there that you will beat. I've seen them run a slow as 8.9s at local 1/8th mile tracks. Sometimes the car isn't as important as the driver behind the wheel. Good luck!
 
B

BlakeGT

New Member
Jul 8, 2004
99
0
0
Missouri
May 3, 2005
#3
  • May 3, 2005
  • #3
WOuld a throttle body, pulleys and nitto slicks help me take it in the quarter mile?? ARe pulleys and throttle body worth it??

Thanks
 
1

1996COBRA

Founding Member
Aug 30, 2000
360
0
0
dallas
May 3, 2005
#4
  • May 3, 2005
  • #4
pullies - yes...throttle body - no

longtubes will help as well, but then you have to get a new mid pipe as well. your IRS probably won't like the slicks, but if the rear holds up, YES, they will help you. ALOT! Practice will help you too. The fastest timeslip doesn't always win the race. Reaction times and 60' are very important. Just keep practicing. This is for the track of course. And for those that tend to race elsewhere, just hit it a LITTLE early, as long as it's not too early, no one will notice.
 
B

BlakeGT

New Member
Jul 8, 2004
99
0
0
Missouri
May 3, 2005
#5
  • May 3, 2005
  • #5
I have a diablo programmer like i said, however.. would a plasma booster help me?? horsepower wise?? Also any better intake like a WMS??

Thanks for all your help..I just wanna be able to handle the 03 cobra now. then when i get a 100 shot. i'll take them pretty bad. haha
 

missouri_guy197

New Member
Aug 31, 2002
1,441
1
0
St. Louis, MO
May 3, 2005
#6
  • May 3, 2005
  • #6
No, the plasma boosters are a waste and usually cost hp instead of giving hp...

You have very high expectations if you want to keep up with 03/04's...with just a pulley, tune, exhaust and CAI they are usually low 12 second cars...You'll need full exhaust and all the bolts ons and be able to drive like a mofo to get down in that region...A solid axle sure does help at the line too...
 
B

BlakeGT

New Member
Jul 8, 2004
99
0
0
Missouri
May 3, 2005
#7
  • May 3, 2005
  • #7
if i got shorty headers and my x-pipe. Maybe a better intake like a WMS? and pulleys?? That may help. I just wanna be able to hang with them. The people around here that have them are older folks.. like 45+. which they may not know how to drive as good?? Is there a better intake than the K&N?? How about a PRo-M??? will that mess up my timing or lean/rich ratio
 

Doc GTO

Member
Oct 23, 2004
610
0
16
Ocala, FL
May 3, 2005
#8
  • May 3, 2005
  • #8
Just get LTs, CAI, exhaust, 100 wet shot, and drags. Then hold on!
 

pvteye

New Member
Apr 3, 2004
68
0
0
May 3, 2005
#9
  • May 3, 2005
  • #9
stick with hunting 01 and earlier Cobras, most of the 03/04 crowd are modding also. I am over 45, and no way you would hang with me... sorry...
 
B

BlakeGT

New Member
Jul 8, 2004
99
0
0
Missouri
May 4, 2005
#10
  • May 4, 2005
  • #10
Yeah true.. well maybe if i had a 100 shot, i would be able to thanks everyone. I knew it would be a long shot.

Thanks
Blake
 
W

woomaster

New Member
Apr 21, 2004
60
0
0
San Antonio, TX / Wheaton, IL
May 4, 2005
#11
  • May 4, 2005
  • #11
My bro has an 01 that he has been dropping weight on his for a while and with the aluminum block advantage, he can usually keep up through second gear....but as soon as I hit 3rd, it is no contest. Thus, he wants revenge and will be installing a Procharger P1-SC next week.
 

Dr. Wu 2000

New Member
Feb 16, 2004
554
0
0
Eastern, Pa.
May 4, 2005
#12
  • May 4, 2005
  • #12
You are asking alot of your 01' to hang with an 03-04'. You need all the mods listed above and with equal drivers you may have a shot against a stock 03-04' snake. Mess with a modded one and do yourself a favor and save your gas. Good luck.
 
0

01TrueBlueCobra

New Member
Feb 16, 2004
336
1
0
somewhere
May 5, 2005
#13
  • May 5, 2005
  • #13
If you want a better intake , get the JLT CAI. It's the best CAI out there for our cars. I would also change your mufflers to a strait through style since it will give you more power.
 
B

BlakeGT

New Member
Jul 8, 2004
99
0
0
Missouri
May 5, 2005
#14
  • May 5, 2005
  • #14
were can you get a JLT CAI from?? Are Steeda Pulleys the best, they don;t mess up anything do they?
 

SVT98Snake

New Member
Apr 15, 2005
258
0
0
OK, USA
May 5, 2005
#15
  • May 5, 2005
  • #15
BlakeGT said:
were can you get a JLT CAI from?? Are Steeda Pulleys the best, they don;t mess up anything do they?
Click to expand...

http://www.jlttruecoldair.com/
 
0

01TrueBlueCobra

New Member
Feb 16, 2004
336
1
0
somewhere
May 5, 2005
#16
  • May 5, 2005
  • #16
Steeda pullies are the best in my opion and it won't mess anything up if it's installed right. The main concern is the Crank Pulley. The JLT is awesome call them up for the best deals and faster order.
 
9

95.0Stang

Member
Feb 20, 2003
538
1
18
Kansas
May 5, 2005
#17
  • May 5, 2005
  • #17
why bother spending the money on all those mods when you could save it, and trade into an 03-04, hell if you wait long enough you could trade into the GT500, and beat these guys STOCK!!!

Personnally, I am hoping to get an 03-04 before September!
 

squares98

Member
Aug 20, 2004
852
0
17
Orange,ca
May 5, 2005
#18
  • May 5, 2005
  • #18
that thread title cracks me up.
 
C

chuckstang95

Member
Nov 1, 2004
138
0
16
Boston
May 6, 2005
#19
  • May 6, 2005
  • #19
dont mean to hijack the thread but just a random question that kinda pertains to this
Im just getting outa college and I have a 99 cobra relatively stock except gears and it has 81,000 miles, do you think I should should save up for the money to supercharge it or just save up and wait until I can afford an 03/04? Im just looking for like 400 hp but I just dont wana throw money into my ageing car if the motor will just blow up or anything else that may go lol, I know this is an opinionated question but Im curious what you all think
thx
also Im one of those that is pretty attached to their car haha , if ya know what I mean. so it would be tough to part
 

SVT98Snake

New Member
Apr 15, 2005
258
0
0
OK, USA
May 6, 2005
#20
  • May 6, 2005
  • #20
chuckstang95 said:
dont mean to hijack the thread but just a random question that kinda pertains to this
Im just getting outa college and I have a 99 cobra relatively stock except gears and it has 81,000 miles, do you think I should should save up for the money to supercharge it or just save up and wait until I can afford an 03/04? Im just looking for like 400 hp but I just dont wana throw money into my ageing car if the motor will just blow up or anything else that may go lol, I know this is an opinionated question but Im curious what you all think
thx
also Im one of those that is pretty attached to their car haha , if ya know what I mean. so it would be tough to part
Click to expand...

Get 03-04....All others have hyperpathetic and cast internals...03-04's have forged...and a t56.

You will have better longetivity.
 
You must log in or register to reply here.

Similar threads

Tuners come on inside
  • squeak93
  • Feb 13, 2026
  • SVT Tech Forum
Replies
1
Views
261
SVT Tech Forum Feb 20, 2026
squeak93
J
'96 Cobra: A/C gets weak and engine misfires under load when warm
  • jruhnke
  • Oct 22, 2025
  • SVT Tech Forum
Replies
2
Views
325
SVT Tech Forum Nov 20, 2025
nickyb
B
2001 roush stage 3 - sat for 5 years
  • Brando_05
  • Aug 26, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
262
1996 - 2004 SN95 Mustang -General/Talk- Aug 26, 2025
Brando_05
B
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
755
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
10K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?