AOD to TK0 500 questions.

90' LX 5.0 · Aug 17, 2006

So ive decided that im going to go through with the AOD to TKO 500 swap.

I need to buy the 31 spline driveshaft yoke to go with the TK0. Is the stock driveshaft going to work with this?

Will the TK0 bolt up to a stock T-5 Bellhousing?

And will the stock crossmember work?

I found a parts list/how to on swapping a T-5 into an AOD car, so im trying to piece together the list for the TK0...

90' LX 5.0 · Aug 17, 2006

So i found the right bellhousing... Its the bellhousing that they used in the 1995 Cobra R's... I can get one brand new for 190... and jegs sells a crossmember for the TKO... so... we have narrowed it down to one question...

Driveshaft? Will the stock one work?

Sicarius428 · Aug 17, 2006

You just need the 31 spline yoke and attach it to your current driveshaft. You will need the bellhousing for the TKO series. Not sure if its the same as the 95 cobra R. I know that the stock T5 crossmember can be modified for use with the TKOs but HPM makes one that directly bolts in.http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=HPM-5059-AZ 1&comp=LRS
You can find it for cheaper... I purchased mine from Florida something or other for about 100 shipped.
Check out www.ddperformance.com I got my AL bellhousing, Mcleod 26 spline clutch disk(already had a centerforce pressureplate), tko600, 3 qt of gm synchromesh and 31 spline yoke for about 2200 to my door.
Kevin

AOD to TK0 500 questions.

90' LX 5.0

New Member

90' LX 5.0

New Member

Sicarius428

Active Member

Similar threads

AOD to TK0 500 questions.

90' LX 5.0

New Member

90' LX 5.0

New Member

Sicarius428

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency