APC seats in a 66

[outlaw66]

The APC seats available from Jegs and Summit..... Has anyone ever installed any in a 65-66? The seat base/track assy is taller than original making the overall height of the seat to much . The only way I can see to install them is to cut away portions of the seat pan and reinforce. If someone has pics or information, please advise.

Outlaw66

 

[66moneypit]

If you do install those APC seats...add them to the link in my signature please. Collecting data on non-stock seats....thanks

 

[nmk_61802]

Can you redrill the seat bases to accept the stock tracks? I know to install late model seats you have to redrill and use the stock seat tracks to lower the seat height.

 

[outlaw66]

moneypit. I'll get them in and will post your link.
mmk...good idea,however, I checked that option but the seat itself is the problem. the original tracks are about the same as whats on the APC seat. at this point I see no other way than to cut a section out of the seat pan, and reinforce, to get the seat down an inch or so.
outlaw