I'm not looking to spend a lot on wheels and tires right now, as I'm putting the $$ elsewhere for suspension and steering. But, I've been checking out some used wheels for an upgrade to 15". It seems that all of the used Cragars that I find are unilug--fitting 4.25 & 4.5 bolt patterns. Anyone have, or know of, problems experienced w/ these? Are they sufficient for a budget upgrade on a weekend/nice weather driver? I've passed on a couple of opportunities to get a set of 4 (w/o tires) for $250-300, but have a similar opportunity.
Any input is appreciated!
Any input is appreciated!
D.Hearne
New Member
Unilug's are fine for anything. I'd be more concerned with the Cragar's propensity for the chrome peeling off.
Unilug's are fine for anything. I'd be more concerned with the Cragar's propensity for the chrome peeling off.
D.Hearne
New Member
LOL--thanks, guys! There appears to be a concensus! I appreciate the input, and I'll look closely to make sure that the appearance/condition are acceptable.
Again, many thanks!
Again, many thanks!
bnickel
Founding Member
i ran uni-lugs for a long time with no problems. as long as you use the right lug nuts and/or washers (depending on which style it is, there are 2 styles, ET and everyone else) you'll be fine, i've used both styles with no problems.
danny clemens
Member
- May 4, 2005
- 728
- 0
- 16
D.Hearne
New Member
LOL--thanks, guys! There appears to be a concensus! I appreciate the input, and I'll look closely to make sure that the appearance/condition are acceptable.
Again, many thanks!
The S/S wheels used to be bad about peeling the chrome off the aluminum wheel centers. As for the steel rims they, like all other chromed steel wheels have to be maintained (cleaned often) to keep the rims from rusting too.
Well, I took the plunge and managed to pick up a used set today. It diverts a little bit of funds from the suspension project, but, they'll be a nice addition.
JDS68Stang
New Member
I bought 4 brand new Cragar SS about 5 years ago, stored them one winter in my Moms garage undercover. My brother ended up moving them standing upright, a chipmonk pissed on them and they rusted around the rims on two from that little rodent
Most, even if in bad shape can be cleaned up OK with steel wool and a good car wash cleaner. An oil base silver paint put on by small brush will cover most rusted/pitted areas and look OK from 10-15' away.
I just stored mine tonight and rubbed them down with vasalene to keep any moisture off them. I think my brother knows NOT to move them this time around
If you run the unilugs, check periodically to be sure their still tight.
(any washered wheel for that matter)
Most, even if in bad shape can be cleaned up OK with steel wool and a good car wash cleaner. An oil base silver paint put on by small brush will cover most rusted/pitted areas and look OK from 10-15' away.
I just stored mine tonight and rubbed them down with vasalene to keep any moisture off them. I think my brother knows NOT to move them this time around
If you run the unilugs, check periodically to be sure their still tight.
(any washered wheel for that matter)
Be careful with the tire shop you go to and make sure they put them on correctly after they install the tires. I've heard a few horror stories of wheels comming off with those. Apparently some people can't figure out how those washer work....
I'd avoid the mess all together and take the rims to the shop, have them install the tires and then bring them back and put them on yourself.
I'd avoid the mess all together and take the rims to the shop, have them install the tires and then bring them back and put them on yourself.
D.Hearne
New Member
One thing about using uinlug washers--avoid the cheap ones and buy the thick hardened washers. The cheap washers bend too easy.
Thanks, everyone. I will certainly heed all of the advice received so far.
Install them myself . . . can do. Check.
Hardened washers . . . can do. Check.
Avoid chipmunk piss . . . I promise to do my best!
Install them myself . . . can do. Check.
Hardened washers . . . can do. Check.
Avoid chipmunk piss . . . I promise to do my best!
Similar threads
- Replies
- 8
- Views
- 188
- Replies
- 0
- Views
- 1K
- Replies
- 23
- Views
- 4K
- Replies
- 21
- Views
- 3K
Progress Thread
Dirty Water Racing 89 Notch Project
- Replies
- 64
- Views
- 13K