- Dec 19, 2010
- 5,719
- 4,238
- 224
A little tip that will be good when spraying 2k primer and color, wrap the air hose around your back so it's away from the car. Another thing, sorry for all the unsolicited advice, you don't really need to block sand the epoxy (etch) primer. Just rough it up a little with a scotch pad before applying bondo and filler primer.
Do you have an air regulator on your gun? I see the filter but that is all, it could be there but just not visible.
Loving the progress man! Keep up the good father/son work
Always welcome advice. Yeah, I usually wrap the hose like you are saying. This was literally my son's first go, so he was a little awkard. I don't have a reg on my gun, I just used the one on the compressor. I need one.
As far as blocking.. im going to do the filler work over the epoxy and most likely shoot more over it without reducer, then block it before the color. This is summit brand epoxy primer and the instructions say it is good for high build sans reducer.. never used it before but it looks like it will work well.
Thanks for the compliments, btw!