• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

At a Crossroads w/my 5.0 coupe project

  • Thread starter Thread starter chgovfk
  • Start date Start date Mar 1, 2011

chgovfk

15 Year Member
Apr 17, 2007
531
28
59
AZ
Mar 1, 2011
#1
  • Mar 1, 2011
  • #1
All –
I’m at a difficult decision here with my coupe project –
I pulled a 351w and trans from a 1970 LTD – the block is back .30 over – the LTD trans is an automatic (I think a C-6) but it could be a C-4 …I’m still cleaning it up (will run the numbers) …I have a 1993 4cyl coupe / auto – that I’m taking it down to the ‘shell’ but was going to leave the dash and steering wheel in …I’m a paint and body person (worked in a bod shop when younger) ….but with making the cam choice to rebuild the motor – I really want to switch over the coupe’s automatic to a T-5 stick …….that means tearing the dash apart ….hanging pedals …cutting holes …finding all of the assemblies – clutch fork etc…..I’m re-building the motor 1st so I have to make the decision so I can pick a cam….but …it’s a commitment ….I thought making the decision to do an all ‘black’ interior was bad enough – new seat belts / etc…but since it needs seat covers headliner etc anyway …it wasn’t as bad as this …what do you guys think about switching it over from a auto to a stick….no drag strip – this will be a weekend cruiser…..let me know….
thx
 

Attachments

  • stang net 007.webp
    32.5 KB · Views: 139

90lxcoupe

20+ Year Stangneter
Oct 7, 2003
3,596
350
134
Mar 1, 2011
#2
  • Mar 1, 2011
  • #2
the t-5 swap isnt as bad as your making it out to be, just need pedals, no need to take the dash out, dont even have to remove the center console...

Whether the t-5 lasts behind the 351 is a whole different story
 

quartermileking

New Member
Feb 21, 2011
16
0
0
Mar 1, 2011
#3
  • Mar 1, 2011
  • #3
If it a street car put the stick. Make it a mans car.When you are laying out second and cherping third , thats what you want. You done so much work dont get lazy now!! good luck. If you need pedals or any of that stuff i got it let me know.
 

Wildstringer

New Member
Feb 20, 2011
65
0
0
Mar 1, 2011
#4
  • Mar 1, 2011
  • #4
quartermileking said:
If it a street car put the stick. Make it a mans car.When you are laying out second and cherping third , thats what you want. You done so much work dont get lazy now!! good luck. If you need pedals or any of that stuff i got it let me know.
Click to expand...

for quartermileking;

I had a 87 and the body was rusting away. Got a 4 cyl 91 from Cali. I took everything I needed from the 87 except I forgot to get the clutch brake pedal assy. If you have an assy. for sale or trade let me know.

for chgovfk;

As far as cutting holes and removing the dash. Henry Ford had the idea and they stuck with it. If the mustang was offered with a manual which we know it is the holes are technically there they just have to be punched out. they are perforated and a hammer and flat punch should get them out. the pedal assy bolts in the same exact way just a matter of it having one or two pedals.
 

larrym1961

5 Year Member
Dec 18, 2010
570
36
49
Idaho Falls Id
Mar 1, 2011
#5
  • Mar 1, 2011
  • #5
I swapped an auto for manual, the pedal swap was not bad at all, took about an hour. No cutting or modifying needed, unbolt the auto pedal assy. and bolt in the clutch pedal assy. It definatly made it it much less difficult by removing the drivers seat.

I have had both transmissions in my Mustang and prefer the manual over the boring auto.
 

chgovfk

15 Year Member
Apr 17, 2007
531
28
59
AZ
Mar 1, 2011
#6
  • Mar 1, 2011
  • #6
thanks!!!

From what I'm reading - I'm going with the stick....for the money to rebuild that auto w/a shift kit ....I can get a T-5....rebuilt....I hope your right on the pedals ...thanks
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Mar 1, 2011
#7
  • Mar 1, 2011
  • #7
I wouldn't put a T5 behind a 351W, it more then likely wouldn't last very long.
 

chgovfk

15 Year Member
Apr 17, 2007
531
28
59
AZ
Mar 2, 2011
#8
  • Mar 2, 2011
  • #8
What 5 speed will work best ?...on a tight budget....not to familar with diff types of trans
 

larrym1961

5 Year Member
Dec 18, 2010
570
36
49
Idaho Falls Id
Mar 2, 2011
#9
  • Mar 2, 2011
  • #9
When I did my swap I went with a Tremec 3550, that is what Ford SVT put behind their 351 powered '95 Cobra R Mustang. I am sure for a manual trans, most would agree on a Tremec.
 

chgovfk

15 Year Member
Apr 17, 2007
531
28
59
AZ
Mar 2, 2011
#10
  • Mar 2, 2011
  • #10
ok sounds like a winner - are any available from any stock ford cars ...
 
You must log in or register to reply here.

Similar threads

P
Fox Opinions Wanted- at a crossroad with my '88 GT
  • pindude80
  • Apr 18, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 22, 2025
pindude80
P
G
Intro and FB questions
  • gflat65
  • Nov 16, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
212
1965 - 1973 Classic Mustangs -General/Talk- Nov 25, 2025
horse sence
O
Help
  • OnisimusD
  • Oct 13, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
16
Views
428
1965 - 1973 Classic Mustangs -General/Talk- Oct 14, 2025
OnisimusD
O
Progress Thread 351w Build, 67 Coupe
  • redstang67
  • Oct 4, 2024
  • Classic Mustang Specific Tech
Replies
3
Views
346
Classic Mustang Specific Tech Oct 5, 2024
89ripper
S
65 Coupe I6 Auto to 302 EFI 5 Speed Swap
  • Scuderia
  • Feb 3, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
14
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Sep 9, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?