I live in the Atlanta area and I have no idea where to go for a major engine upgrade. Here's what I'm getting done in the somewhat near future:
1. Rebuild stock engine to a 306 with a stroker kit from CHP (or similar)
2. Add aluminum heads and emissions friendly cam
3. Kenne Bell standard 2.2L kit (8 or 9 psi will be used)
4. All upgrade items will be emissions friendly. Smaller upgrades like MAF will be added and whatever else is necessary for this combo.
5. Finally, a dyno tune will need to be done for a custom chip.
I could get a 306 crate motor from CHP. Maybe a crate motor is the way to go and it may cost less than a rebuild. Either way, I need a shop to do the total install.
Anybody know of any shops in the Atlanta area or within a couple hours that can do what I need? Hopefully, a
Thanks.
1. Rebuild stock engine to a 306 with a stroker kit from CHP (or similar)
2. Add aluminum heads and emissions friendly cam
3. Kenne Bell standard 2.2L kit (8 or 9 psi will be used)
4. All upgrade items will be emissions friendly. Smaller upgrades like MAF will be added and whatever else is necessary for this combo.
5. Finally, a dyno tune will need to be done for a custom chip.
I could get a 306 crate motor from CHP. Maybe a crate motor is the way to go and it may cost less than a rebuild. Either way, I need a shop to do the total install.
Anybody know of any shops in the Atlanta area or within a couple hours that can do what I need? Hopefully, a
Thanks.