autometer mechanical temperature gauge

[Grn92LX]

I have a mechanical temp gauge i'm looking to put in my 91 Notch I just picked up. The fitting is 1/2" npt. Do I need another fitting to screw into the intake to 'lock' the mechanical sensor in? Just want to know before I take everything apart. Here is a picture:

View attachment 243334

 

[WHT306]

There is an adapter to put on that you can get it at a perf. store that sells auto meter its like 5.00-15.00

 

[Mustang5L5]

Yes, there is another peice you need.

Check out autometer's website under accessories. I beleiv it's the 3/8" NPT version you need

 

[HISSIN50]

It is a 3/8" NPT adapter for a SBF.

 

[Grn92LX]

Thanks guys. I believe I need ATM-2263. I'll see if the speed shop has it so I can do it this weekend.

 

[1991notchbackLX]

Mike, the new Action Performance on Hawkins Rd in Ronkonkoma is pretty awesome. They have tons of stuff. I don't know how far you are from SK Speed, but that little fitting would probably be about $475 from them.

 

[HISSIN50]

You should also be able to get it at a normal parts store (not the AM brand, but a similar part for the store's line of gauges).

 

[wildstang88]

Atm-2263 is the correct part number needed...I just orded one for my sisters Fox.

 

[Grn92LX]

Mike, the new Action Performance on Hawkins Rd in Ronkonkoma is pretty awesome. They have tons of stuff. I don't know how far you are from SK Speed, but that little fitting would probably be about $475 from them.

Chris, it would cost me $475 in gas just to drive out to ronkonkoma SK speed is 2 minutes away, they should have it.