• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

[B]Kill Switch Install -Fox Body[/B]

  • Thread starter Thread starter dls322
  • Start date Start date Apr 5, 2005

dls322

Member
Apr 4, 2005
149
0
16
Mt. Penn, PA
Apr 5, 2005
#1
  • Apr 5, 2005
  • #1
Any one out there ever install a kill switch in their stang or have any suggestions. I'm sure any pro theif can hotwire an 88 mustang, I'd sleep better knowing she was safer. Thanks in advance!
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,811
234
Dublin GA
Apr 5, 2005
#2
  • Apr 5, 2005
  • #2
On 87- 91 cars the fuel pump relay is under the seat. Cut the red/black wire going to the fuel pump relay. Splice a 16 or 18 gauge wire into the wire and connect it to one side of the switch. Connect the other side of the switch to the other end of the red/black wire going to the fuel pump relay. When you are done the switch should be in the middle of the spliced red/black wire that goes to and comes from the fuel pump relay. Using the inertia switch side of the circuit allows you to use light gauge wire and light duty switches. There is less than 1 amp going through the circuit, so you don’t have to worry about voltage drop across the wiring depriving the fuel pump of electrical power.

Wiring diagram for 86-90 cars is next
 

dls322

Member
Apr 4, 2005
149
0
16
Mt. Penn, PA
Apr 5, 2005
#3
  • Apr 5, 2005
  • #3
Awesome, thanks for the quick reply and detailed advice. I'm definatly installing this on saturday. I feel better allready.
 
8

87GT 306

New Member
Oct 11, 2004
260
0
0
Springfield MA
Apr 5, 2005
#4
  • Apr 5, 2005
  • #4
Get a quick-disconnect steering wheel. Cant go too far without a wheel.
 
J

jerry beach

Founding Member
May 20, 2002
2,671
0
46
Ocala,FL
Apr 5, 2005
#5
  • Apr 5, 2005
  • #5
Not, you can clamp vise grips on the shaft and steer it that way. I know people who have done it.

Just use that basic info and be creative and original. One could interruprt that inertia switch in the trunk of a coupe, then the thief would have to break in there too. something that is gonna take him alot of time to find is good, he doesnt want to fiddle with it till your dog barks and you wake up. He could end up with some extra holes in his body that way.
 

stock 92 gt

New Member
Mar 30, 2005
165
0
0
Apr 5, 2005
#6
  • Apr 5, 2005
  • #6
87GT 306 said:
Get a quick-disconnect steering wheel. Cant go too far without a wheel.
Click to expand...

they could always have one too.
 
8

87GT 306

New Member
Oct 11, 2004
260
0
0
Springfield MA
Apr 6, 2005
#7
  • Apr 6, 2005
  • #7
I cant see someone steering with visegrips, Im not sayin it cant be done but I just imagine it would be a pain in the a$$. I just said it because I know someone who lives in an apartment in the city and doesnt have a garage or driveway and hes never had his car stolen (with a disconnectable wheel). It was broken into but never stolen.
 

dls322

Member
Apr 4, 2005
149
0
16
Mt. Penn, PA
Aug 21, 2006
#8
  • Aug 21, 2006
  • #8
Ok, I went out to actually put the switch in, and I can't find the red/black wire. What seat is it under? Drivers-Passenger-Rear? Also, is it in another location because my car is a convertible?
Thanks
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,811
234
Dublin GA
Aug 21, 2006
#9
  • Aug 21, 2006
  • #9
dls322 said:
Ok, I went out to actually put the switch in, and I can't find the red/black wire. What seat is it under? Drivers-Passenger-Rear? Also, is it in another location because my car is a convertible?
Thanks
Click to expand...
The fuel pump relay & red/black wire are under the driver's seat. You will need to remove the 4 bolts that secure the seat in place to gain access to it.
 

dls322

Member
Apr 4, 2005
149
0
16
Mt. Penn, PA
Aug 21, 2006
#10
  • Aug 21, 2006
  • #10
Excellent!!! Just the info I was looking for....

Thanks!! :SNSign:
 
You must log in or register to reply here.

Similar threads

M
a Pro-M EFI system
  • maximilian macdoanald
  • Feb 6, 2026
  • Digital Self-tuning Forum
Replies
7
Views
416
Digital Self-tuning Forum Jun 5, 2026
X-cam34
X
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
545
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
E
Terminator X Kill Switch install
  • Ethereal_Zer0
  • Feb 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2025
90sickfox
T
Service Fluid Recommendations for 2015 Paxton Supercharged GT
  • ThotTrap
  • Aug 25, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
0
Views
116
2015 - 2023 (S550) Mustang -General/Talk Aug 25, 2025
ThotTrap
T
Exhaust 1 3/4” Long Tubes on a Fox Body AOD – Easiest route?
  • 5.0 Mike
  • Mar 19, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
1K
Fox 5.0 Mustang Tech Mar 21, 2025
5.0 Mike
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?