Progress Thread Back With A Fox Again.

Bad Sheep · Mar 21, 2017

I got my intake painted. Just need to clean and oil my air filter. One more little thing done.

Davedacarpainter · Mar 21, 2017

Bad Sheep said:
I got my intake painted. Just need to clean and oil my air filter. One more little thing done.

That looks nice!

Bad Sheep · Mar 21, 2017

Davedacarpainter said:
That looks nice!

Thank you.

90sickfox · Mar 22, 2017

That intake turned out pretty dang good !

Bad Sheep · Mar 22, 2017

90sickfox said:
That intake turned out pretty dang good !

Thank you. I'm not the best painter. Happy it turned out good.

Bad Sheep · Mar 25, 2017

Well my LMR order came in .

Still need more parts. Seems like theres always more lol. Its a start. Can't wait to start replacing parts. Then cruse for the rest of the summer.

I think next I will work on my intake. Explorer (GT40) intake. Clean it up and paint. Maybe some gasket matching at the same time.

I also have a 1" spacer. Will it fit under a Stock hood?? From what I have read online it should. Might have to take off my hood insulation. Mine is in bad shape anyways so I was going to take it off.

Bad Sheep · Apr 13, 2017

Well I went to wake up my baby almost two weeks ago. Lets just say she was not ready. Still way to much snow

https://www.facebook.com/video.php?v=1898420773734962
I got some more parts in. MSD coil and a Accel wire to replace my coil wire. When I got my new wires last summer the coil wire was to short so I ordered one off Ebay.

Bad Sheep · Apr 13, 2017

The snow melted enough so I could start my baby. Still little to much to move her home.

I reconnected the battery and She fired right up. So happy, now I just want to go for a ride.

https://www.facebook.com/video.php?v=10158478781935383

Mustang5L5 · Apr 14, 2017

1" spacer may not clear the stock hood. I have a 3/8" spacer on my Cobra intake and it's close. 1/2" would probably contact.

I wouldn't lose much sleep if you can't run the spacer. Explorer intake is already well known for producing torque with its larger plenum volume

Bad Sheep · Apr 14, 2017

Mustang5L5 said:
1" spacer may not clear the stock hood. I have a 3/8" spacer on my Cobra intake and it's close. 1/2" would probably contact.

I wouldn't lose much sleep if you can't run the spacer. Explorer intake is already well known for producing torque with its larger plenum volume

Thank you for the info. I will just have to wait to install my spacer I guess. No big deal.

90sickfox · Apr 14, 2017

You are silly, man What ? !!!!! Vrooom ! ...what ?!!! VROOOOOOMM !!! Lol

Bad Sheep · Apr 28, 2017

I was finally able to bring my car home. The weather is still not the best so I have not started the water pump replacement yet. But i did do some work on her. I installed my fog lights. Had to clean the connectors. Mounted them up and plug them in. They work .

Before

After

Looks way better. Just have to wait for night so I can align them. I will pick up what I need to do the fog light switch mod. Don't need my lights going out on me at night or worse burn my car up. Now she will need new head and park lights. They look really bad compared to the new fog lights.

mikestang63 · Apr 28, 2017

careful doing those 5k rpm revs with a bone cold motor. Good way to snap a piston ring.

Bad Sheep · Apr 28, 2017

Its was warmed up. It does not run much warmer then that in the summer when it hot here.

Bad Sheep · May 7, 2017

I installed a new head unit this weekend. Sony MEX-N4100BT. Nothing special but it has bluetooth to stream music. Just need new speakers and a 10" sub for a little boom boom.

I also installed my Auto Meter carbon fibre volt gauge. I will have to get or make piece to hold my head unit and gauges. But it works for now.

I think it looks good at night with the red lights. Lot more red lights to come.

Took my girl out for a ride and took some pics.

Bad Sheep · May 7, 2017

I'm starting to clean my GT40 (explorer) intake. Remove the 30lbs injectors and install my 19lbs. Going to need new O-rings. I'm also going to be painting it black at the same time. Almost time to change the water pump and few other things.

Bad Sheep · May 14, 2017

I got some more work done. Dropped off my intake to get the throttle open to 70mm. There also blasting it and plugging the EGR hole in the bottom part of the intake. Clean and painted my heads, Installed my stud mounted rocker arm kit. I also bolted my shorty headers to see what its going to look like. Going to change the water pump and do the other stuff may run weekend. Hope to get it all done by the monday the 22nd.

I clean and painted my driver side trim pieces clean her up a little. Going to do the passenger side next. She needs a paint job but it won't be for a while. So this will have to do.

I also finally did the fog light switch mod. Was easy to do. Now I can run my fog lights and not have to worry about burning my car down.

Bad Sheep · May 30, 2017

Well its time to clean this up a little and install the new water pump.

https://www.facebook.com/video.php?v=10158694124430383
So I strip her down the top end and water pump.

Clean it up and starting to go back together.

Checking to see how its going to look done

Back to the work so far. Clean up the alternator bracket and painted it. I also installed my air pump delete pulley. Starting to look good.

My intake is almost ready to install. The porting of the throttle body opening to 70mm is done. Just have to work on the vacuum lines. Install the water pump, paint the brackets for the A/C and power steering pump. Then she will be ready to fire up. Can't wait, want to drive her again.

I think the motor plate turned out good.

Blandnuts · May 30, 2017

Looks good mate!

Mstng93SSP · May 30, 2017

Car is looking good! What part of Ontario are you In? I am going to Toronto (Oakville actually) in a few weeks. My wife's entire family lives there and my son is at U of T. I am trying to find the name of the huge mustang salvage yard in southern Ontario. Do you happen to know it offhand? I remember seeing it in 5.0 magazine a few years ago. Guy had tons and tons of foxbodies in his yard.

Thanks

Chris

Progress Thread Back With A Fox Again.

Well-Known Member

Chicks can make things hard if they’re inspired...

Well-Known Member

Wasn't a pretty sight...and I've got big hands

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

That is…until I whipped out my Bissell

Well-Known Member

Wasn't a pretty sight...and I've got big hands

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

I don't swallow; I only swoosh

You have a nice rear end there Dave.

Similar threads

Privacy & Transparency

Privacy & Transparency