• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

bad habits you have when working on your car

  • Thread starter Thread starter carbed87
  • Start date Start date Jan 30, 2007
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
8

89tang

Founding Member
Oct 20, 2000
2,508
0
0
Newark ohio
Jan 30, 2007
#21
  • Jan 30, 2007
  • #21
I have a bad habit of working to fast and losing my temper alot. I lose track of tools all the time working on something. I'll lay the damn thing down and go back to the same spot and it's GONE! lol. My g/f sometimes keeps me company when i'm doing something ONLY if i promise not to cuss and yell lol that never works out cause cussing and yelling is part of working on the cars. My g/f even asked me once why do you work on cars if it pisses you off so much i couldn't answer it.

I know you all have done this too, drop a bolt and you can not find it. It's like there's a black hole under my car but only when i'm holding a bolt i don't have a replacement for. And you can bet your ass i'm going to drop it, hear it clank around for a few sec.'s and never find it again.
 
M

MustangGT95

New Member
Jul 29, 2003
407
1
0
Jan 30, 2007
#22
  • Jan 30, 2007
  • #22
Least you guys get to hear the school bus. I see it lol. Oh a garage would be so nice on cold winter nights.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Jan 31, 2007
#23
  • Jan 31, 2007
  • #23
Heheh heated/air conditioned shop about 50 feet from my bedroom, and about 5 feet from the game room. Cant really beat that other than the fact I have to drive back from school to use it!
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Jan 31, 2007
#24
  • Jan 31, 2007
  • #24
86bluecobra said:
My worst habit while working on my car is drinking to many beer while i'm modding it.
Click to expand...

man that is when I do some of my best work
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
314
281
134
Apache Junction, AZ
Jan 31, 2007
#25
  • Jan 31, 2007
  • #25
I can't seem to just focus on one project at a time. I'll start out just doing a brake job, and then somehow wind up touching up paint, detailing the interior, then back to the brake job, then chasing down some random squeak or rattle in the interior/exterior and silencing it, back to the brake job again, then I start wiping down parts of the engine bay and wind up detailing everything underhood and ... well, you get the idea.
 

payupsucka

Member
Sep 28, 2003
324
0
16
Keeping it grimy in Fall river MA.
Jan 31, 2007
#26
  • Jan 31, 2007
  • #26
i break sockets like its my job.
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Jan 31, 2007
#27
  • Jan 31, 2007
  • #27
I work on Harleys for a living, and you're always on the clock. So when I'm working on my car there's a lot less pressure, and nothing really bothers me. When I'm working on bikes, the smallest little stupid thing seems to hold me up from getting the job done, and I end up getting pissed and throwing stuff/kicking stuff/smashing stuff with hammers. I once kicked the bottom of my rollaway and somehow all 4 screws had previously fallen out of on of the wheels, just my luck. That box goes over backwards, inches from landing on a $60k motorcycle, and you can imagine the mess inside the box. The F-bomb, along with the most insulting words you can come up with, are very heavily used at my work by all of us. I do the common losing tools/bolts thing too, I think everyone does. Oh, and I'm at Sears at least twice a week returning handfuls of broken Craftsman junk, so I guess I have a habit of buying crappy tools.
 

88Stang331

New Member
Mar 30, 2006
239
0
0
Jan 31, 2007
#28
  • Jan 31, 2007
  • #28
I have a really bad habit of misplacing sockets in the engine bay. I think i always find them, but i'm always worried about losing them while i'm driving down the road.

I haven't had to do this with my stang yet, but i have a 1972 Olds Cutlass with a 350 in it and i worked from 7am to well past midnight on redoing the interior, along with some minor engine work and rebuilding a Carb.

Also I too bang the crap out of my knuckles...all the time.
 

LB0193

Member
Dec 6, 2005
171
0
16
IL
Jan 31, 2007
#29
  • Jan 31, 2007
  • #29
Drinking to much beer, swearing, and throwing s*** when things are not going right....
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Jan 31, 2007
#30
  • Jan 31, 2007
  • #30
Drinking too many beers before i get started. that always ticks me off because i wont work on it if im buzzed.

Also i think too much. I try to think of every way possible that i can do something before i attempt it

Lastly, I hate not having the right tool for the job. I will try to use whatever i have and usually end up getting pissed and screwing up the job.
 

iLkYsPoNy

if she's a tranny then... well I'd do her.... it..
Aug 8, 2006
60
0
6
Sandusky, Ohio ( Cedar Point - America's Rockin' R
Jan 31, 2007
#31
  • Jan 31, 2007
  • #31
Bad habit? Hmmm maybe it's the fact this stuff never leaves my mouth....
 

Attachments

  • Skoal-LC-Apple-5s.gif
    19.6 KB · Views: 106

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 31, 2007
#32
  • Jan 31, 2007
  • #32
i have only worked on my car one time while i was tipsey and i got alot done actually hahah.... my worst habbit is not putting my tools up when im through with them and then wondering where the hell they all went!
 

5.0 Nostalgia

10 Year Member
Feb 28, 2003
904
5
39
CT
Jan 31, 2007
#33
  • Jan 31, 2007
  • #33
mansonozz said:
Banging knuckles, dropping **** in the engine bay, throwing ratchets/wrenches and yelling F-bombs.

I've found that listening to Tom Petty keeps me pretty calm while out there wrenching, so I've listened to nothing but that for the past year's worth of work
Click to expand...

I am guilty of that too. Maybe a little Tom Petty will calm me down too. A nice calm album like Into the Great Wide Open or Wildflowers. I got to try that!

I am also guilty of making a mess of tools. By now I usually know all the sockets needed and try to take just those out, but always end up with a bunch of stuff on the ground. I also tend to misplace nuts and bolts because I put them in the most convenient place at the time but forget about them.

I get aggravated when the creeper gets stuck on the tools and bolts I leave on the ground.
 

payupsucka

Member
Sep 28, 2003
324
0
16
Keeping it grimy in Fall river MA.
Jan 31, 2007
#34
  • Jan 31, 2007
  • #34
iLkYsPoNy said:
Bad habit? Hmmm maybe it's the fact this stuff never leaves my mouth....
Click to expand...

same here except its copenhagen snuff, i cant wait to go home and work on my car
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Jan 31, 2007
#35
  • Jan 31, 2007
  • #35
5.0 Nostalgia said:
I am guilty of that too. Maybe a little Tom Petty will calm me down too. A nice calm album like Into the Great Wide Open or Wildflowers. I got to try that!

I am also guilty of making a mess of tools. By now I usually know all the sockets needed and try to take just those out, but always end up with a bunch of stuff on the ground. I also tend to misplace nuts and bolts because I put them in the most convenient place at the time but forget about them.

I get aggravated when the creeper gets stuck on the tools and bolts I leave on the ground.
Click to expand...

Yup, Wildflowers is the one

I leave tools on my roller chest a lot too, but only when things don't go right and I just start getting upset and mad and I want to get out of there ASAP.
 

smokin91'

New Member
Feb 19, 2006
204
2
0
Jan 31, 2007
#36
  • Jan 31, 2007
  • #36
When your changing the oil and the socket+wrench falls into the dirty old, hot smelly oil sitting in the drain bucket. Such fun reaching in burning hot oil to get the socket out so i can take the 2nd oil pan bolt out.
 

MAC'n89Blckstng

Active Member
Jun 11, 2003
1,012
4
36
NJ
Jan 31, 2007
#37
  • Jan 31, 2007
  • #37
My biggest problem is keeping fluids IN the drainpan. I always end up spilling massive amounts of oil or something onto my fathers driveway and getting a speech about how it shouldn't have to happen like this and how I better be going to the grocery store to buy some cat litter for the driveway. Happens everytime I work on her. My cars name is the "Exxon-Valdez" now because of my dad. I also have a problem with yelling non sense, or yelling, "Your a WHORE! or your a dirty !" whenever I get real pissed at my car. lol I'm getting alot better with neatness now that Im gettin a little more experienced but a project isnt a project without tools spread out everywhere. haha
 

795.0pacecar

lover of pudgy polygamists
Jul 11, 2003
480
0
17
Senoia, GA
Jan 31, 2007
#38
  • Jan 31, 2007
  • #38
I dont throw things anymore, because one time I was pissed, and the radio in the garage started messing up, so I threw a bolt at it, and the bolt bounced back, and hit my sun roof and left a little nick in the glass. I normally just find something to punch that wont break, but gives just enough to not break my hand.

I have a bad habit of losing bolts and not worrying about it because I have a magic bolt box with every size and thread bolt known to man. Then the time rolls around when all the hardware stores close and Im lookin through the magic bolt box for that bolt I lost and it hits me, the bolt box always has every bolt known to man, except for the one Im looking for.

Another bad habit I have is my love of my 650 ft-lb impact gun. I use it any time I have the space for it. The problem is when I switch it to forward I usually forget to lower the power setting on it and I snap off bolts. Then I have to go through the whole magic bolt box ordeal again.
 

fivespeedsteed

20+ Year Stangneter
Oct 17, 2003
748
22
69
Richmond, VA
Jan 31, 2007
#39
  • Jan 31, 2007
  • #39
DMAN302 said:
Yeah it's nice...but untill just a few months ago I was unaware that the other one was stealing every tool he could carry...I thought I was going crazy...litterally spending hours looking for screwdrivers and wrenches I THOUGHT I had left in the bay. He was taking them inside and putting them behind the couch....WHAT THE HELL IS THAT ALL ABOUT>?????????????/
Click to expand...

the poor dog wants to be petted. not watch you spend forever on your car while he waits for you. he wants attention.

mine: piling **** on my workbench so its a foot or so high. i know where everything is though for some reason. i also get angry at little things.
 

ill advised

Member
Apr 29, 2003
656
10
19
West L.A.
Jan 31, 2007
#40
  • Jan 31, 2007
  • #40
Leaving small tools on top of the radiator. Also, I can't keep track of my 1/2" socket(s!) to save my life.
 
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
You must log in or register to reply here.

Similar threads

Engine Information that is Needed When You Post a "Car is not Running" or "Car is Running Poorly" Thread
  • AeroCoupe
  • Apr 28, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
29
Views
1K
Fox 5.0 Mustang Tech May 4, 2025
Bullitt347
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
New daily driver help needed.....not a mustang but mustang drivetrain.
  • Wayne Waldrep
  • Jun 17, 2024
  • Other Auto Tech
  • 3 4 5
Replies
80
Views
6K
Other Auto Tech Jul 28, 2024
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?