• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

bad habits you have when working on your car

  • Thread starter Thread starter carbed87
  • Start date Start date Jan 30, 2007
Prev
  • 1
  • 2
  • 3
First Prev 3 of 3
L

Leezure

New Member
May 10, 2005
104
0
0
Jan 31, 2007
#41
  • Jan 31, 2007
  • #41
89tang said:
I have a bad habit of working to fast and losing my temper alot. I lose track of tools all the time working on something. I'll lay the damn thing down and go back to the same spot and it's GONE! lol. My g/f sometimes keeps me company when i'm doing something ONLY if i promise not to cuss and yell lol that never works out cause cussing and yelling is part of working on the cars. My g/f even asked me once why do you work on cars if it pisses you off so much i couldn't answer it.

I know you all have done this too, drop a bolt and you can not find it. It's like there's a black hole under my car but only when i'm holding a bolt i don't have a replacement for. And you can bet your ass i'm going to drop it, hear it clank around for a few sec.'s and never find it again.
Click to expand...

I just read this to my wife and she busted out laughing. It took me five minutes to convince her that I didn't write it. Great description!!!
 

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Jan 31, 2007
#42
  • Jan 31, 2007
  • #42
ill advised said:
Leaving small tools on top of the radiator. Also, I can't keep track of my 1/2" socket(s!) to save my life.
Click to expand...

I always leave things laying under the hood as well, the top of the factory radiator is so good at holding bolts, wrenches, etc.
 

tording

Founding Member
Nov 11, 2000
164
0
0
Hampton, VA
Jan 31, 2007
#43
  • Jan 31, 2007
  • #43
I never put my tools away as I work so before long all my tools are strewn about on the floor and I can never find what I need. It sucks and slows me down a lot but I always do it. It never fails.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 1, 2007
#44
  • Feb 1, 2007
  • #44
working on a hoist I often bang my head

forget my hoodie at home and work under a salt, snow dripping car alwats sux ass

letting the other guys at work use some of my tools....then I have to search in thier tool box to get them back
 

Graydon5oh

Member
Nov 23, 2002
215
0
16
ARKANSAS
Feb 1, 2007
#45
  • Feb 1, 2007
  • #45
loosing everything tools, nuts, bolts, parts, and probaly distractions like noticing something else to get done in the process before i finish something else
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Feb 1, 2007
#46
  • Feb 1, 2007
  • #46
I've got two things i seem to do a lot that i never seem to learn from....1 is a drop stuff a LOT and get pissed that i have to crawl under the car and fish it out...and 2 is a i have this bad habit of laying tools on my battery when i'm working around it, and it seems like almost every time i end up grounding a tool between the hot and negative posts...and that sucks.
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Feb 1, 2007
#47
  • Feb 1, 2007
  • #47
Never did find my 7/16 stub wrench...anyone else never find a tool again?
 

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Feb 1, 2007
#48
  • Feb 1, 2007
  • #48
DMAN302 said:
Never did find my 7/16 stub wrench...anyone else never find a tool again?
Click to expand...

Well not a tool, but I was bagging bolts when I did my first headswap like 2 years ago. I still havn't found the bag of bolts for the A/C... gone, somewhere in the engine bay... maybe thats why my motor ate it self a couple months ago?
 
R

roadrunner19va

New Member
Oct 1, 2005
63
0
0
Feb 1, 2007
#49
  • Feb 1, 2007
  • #49
Bad Habits

I am with all of the above. We need to make something to cover up the top of the radiator. I always leave bolts and tools up there and I will find them a week later sitting in there. The worst was I misplaced my wedding ring for 2 weeks. My wife was pissed. I was more pissed because I could not find it. Then low and behold. I went outside to tinker with the stang and there it was inside the gully of the radiator next to a 10mm Matco Gear Wrench. I think working on cars everyone will experience all of these. It is all worth it. Looking back at what my stang looked like and looking at it now. I know I did all the work and that makes it all worth it.
 
B

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe
Jul 13, 2003
2,433
23
48
Canada
Feb 1, 2007
#50
  • Feb 1, 2007
  • #50
Too damn scared to break bolts, I start to get hives when I look at parts that need to be removed lol (not really but I get anxious). Ever since I broke an intake bolt into a head and had to drill it out aghhhh!

Sometimes I get mad and break things lol
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Feb 1, 2007
#51
  • Feb 1, 2007
  • #51
DMAN302 said:
Never did find my 7/16 stub wrench...anyone else never find a tool again?
Click to expand...


I know for a fact that i have some sockets stuck on top of my K member
 

88_GT_5_oh

Sportin' a turbo 5.0 in Canadistan
Jul 4, 2004
1
0
1
WPG/MB/CA
Feb 1, 2007
#52
  • Feb 1, 2007
  • #52
85ragtop said:
I don't know when to walk away. I have been known to to work on it all night.
Click to expand...

i am the same way, i work at 7 am and i have stayed in the garage till like 2-3 am working. i am also a messy worker, i try and be neat but i end up leaving a socket or wrench under the car then spend 5 mins looking for that socket. i am also known for my temper when working on my car, i've punched walls causing 3 knuckles to get the skin ripped off, noumerous dents in my garage door from throwing wrenches. the one thing i have never done is hit the mustang, cause i know i will regret it. when i had to fix my tempo i beat the **** out of it though lol, dented the fender, shattered the parking light lens etc.
 

795.0pacecar

lover of pudgy polygamists
Jul 11, 2003
480
0
17
Senoia, GA
Feb 1, 2007
#53
  • Feb 1, 2007
  • #53
Boss 351 said:
Too damn scared to break bolts, I start to get hives when I look at parts that need to be removed lol (not really but I get anxious). Ever since I broke an intake bolt into a head and had to drill it out aghhhh!

Sometimes I get mad and break things lol
Click to expand...

When I did my head swap, I broke a head bolt in the block. Then I broke off an EZ out in it. Then I had to grind it out with a die grinder, rent an angle drill to drill out the old bolt, and heli-coil the hole.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Feb 1, 2007
#54
  • Feb 1, 2007
  • #54
taking my car apart/installing parts when I need the car to get to work the same day.

losing track of tools like 5 sec after i put them down.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 1, 2007
#55
  • Feb 1, 2007
  • #55
I use a magnet tray and place all nuts and bolts in there....and if I'm using just a few tools my front pouch pocket on my hoody sweater works good to place tools in lol. If I am using a bunch of tools I don't leave them on the rad or motor I place them on the work benck and leave them all out till the job is done then put them all away and I always seem to have all my tools when I clean up.....if something is missing it most likely is in my fron pouch pocket
 

Mustang78

New Member
Feb 8, 2006
486
0
0
Aberdeen, WA
Feb 2, 2007
#56
  • Feb 2, 2007
  • #56
i always kick myself for having my girlfriend there while i try to fix something "real quick", it always turns into a home version of cheap **** or i get pissed at myself and the car if it doesn't go right.. i can also never finish something fast enough, i do a thorough job 99% of the time and as we all know, perfection takes time..and i chip my new paint sometimes..not to mention driving my precious front end over bumps and through alleys like it's a truck..makes me sad every time i hear it scrape, but happy when i nail the gas

~Mark~
 

glowstang93

20+ Year Stangneter
Feb 9, 2003
853
8
39
Illinois
Feb 2, 2007
#57
  • Feb 2, 2007
  • #57
roadrunner19va said:
I am with all of the above. We need to make something to cover up the top of the radiator. I always leave bolts and tools up there and I will find them a week later sitting in there. The worst was I misplaced my wedding ring for 2 weeks. My wife was pissed. I was more pissed because I could not find it. Then low and behold. I went outside to tinker with the stang and there it was inside the gully of the radiator next to a 10mm Matco Gear Wrench. I think working on cars everyone will experience all of these. It is all worth it. Looking back at what my stang looked like and looking at it now. I know I did all the work and that makes it all worth it.
Click to expand...

Maybe not the perfect solution, but I use 3/4" wire loom to cover the top of my radiator. It stays on and last for a year or so before having to replace. It keeps the unsightly top of the radiator covered and hides where the paint peels off.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Feb 2, 2007
#58
  • Feb 2, 2007
  • #58
I throw stuff, cuss, like last night, one bolt wouldnt come out of the upper intake, so i started rippin on and cracked a little piece on the intake, no big deal a little super glue wont fix!! LOL
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Feb 2, 2007
#59
  • Feb 2, 2007
  • #59
1. I can't walk away from the car no matter how frustrated and pissed of I am I just have to finish whatever I am working on or I feel like the car "won".

2. I have a really bad temper when I am working on the car when things don't go right which usually involve lots of cursing, yelling at the car and the occasional flying tool. My neighbors know when things aren't going right. At least most of them are into cars and the rest don't really care so thats cool.

3. One project leads to another, and another, and another, and..... well you get the idea. I just can't stop.
 

88_GT_5_oh

Sportin' a turbo 5.0 in Canadistan
Jul 4, 2004
1
0
1
WPG/MB/CA
Feb 2, 2007
#60
  • Feb 2, 2007
  • #60
RYC CUKR said:
3. One project leads to another, and another, and another, and..... well you get the idea. I just can't stop.
Click to expand...

lol i am the same way, a blown head gasket led me to pull the motor, fill in all holes, prep for paint in the engine bay, and buy about 1500 worth of parts lol
 
Prev
  • 1
  • 2
  • 3
First Prev 3 of 3
You must log in or register to reply here.

Similar threads

Engine Information that is Needed When You Post a "Car is not Running" or "Car is Running Poorly" Thread
  • AeroCoupe
  • Apr 28, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
29
Views
1K
Fox 5.0 Mustang Tech May 4, 2025
Bullitt347
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
New daily driver help needed.....not a mustang but mustang drivetrain.
  • Wayne Waldrep
  • Jun 17, 2024
  • Other Auto Tech
  • 3 4 5
Replies
80
Views
6K
Other Auto Tech Jul 28, 2024
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?