Baer Brake Question - HELP!!!

[tunedin302]

I have on order the M2300 killer kit w/ the modified fox spindle. I also have the 1999-2004 Saleen 18x9 wheels to go with it. My question is will these wheels fit on the modified fox spindle or will it require me to get the SN95 spindle? Why do I care? because the modified fox spindle keeps the factory length of the snout/dust cover. This will cause the dust cover to hit the center cap on certain wheels. Any help or advice is greatly appreciated.

View attachment 509659

 

[BlownStangGT]

How about you just give me them freakin brakes......I was told that you can run the 18" saleen wheels with the "cheap" mark 7 or svo brake upgrade in the front, so that means, I assume you can run them with the setup you will go with without any clearence issues...Im pretty sure you can run them....PM me if ur selling the chrome ponys hehe

 

[tunedin302]

PM me if ur selling the chrome ponys hehe

Thanks for the info and yes, they chrome ponys will be for sale soon.

 

[BlownStangGT]

Thanks for the info and yes, they chrome ponys will be for sale soon.

since I gave you the info they should be free to me

 

[tunedin302]

since I gave you the info they should be free to me

Okay ... we'll call it even.

 

[BlownStangGT]

Okay ... we'll call it even.

PM me ur address and Ill come get them when you are ready

 

[tunedin302]

Decided I'm just going to grab a fox rotor, pound the studs out, take into consideration the dust cap, and see if it fits my Saleen wheel w/ center cap.

 

[tunedin302]

Update if anyone cares:

Got a fox rotor, removed the studs, and installed the dust cap on the end. Test fitted this in my Saleen wheel and there is 1/16" clearance. As a result, the Saleen rims will fit with the modified fox spindle from Baer.