ball joints for 5 lug swap?

Jaym14 · Feb 8, 2010

The ball joints in my car are likely the original so it would behoove me to install new ones when I do the 5 lug swap. Which would you recommend? I know that I need sn-95 style, but are regular replacements from the parts store fine or should I invest in Steeda X2's? Also, would you guys recommend offset bushings for the a-arms? (steeda kit)

2000xp8 · Feb 8, 2010

When it comes to balljoints i prefer real ford parts.
As for the offset A arm bushings, me personally i wouldn't use them, but i don't know from experience.
I just don't like messing with the geometry too much, you never know wha'ts going to happen with wheel clearances.
Probably a PITA to put in too.

killer5.0 · Feb 8, 2010

alot of ppl recommend Moog balljoints...thats what im going to be using...let a few more ppl chime in though.

Jaym14 · Feb 8, 2010

So you recommend moog sn-95 ball joints?

Mustang5L5 · Feb 8, 2010

Moog is the brand i would use.

Either go with SN95 or fox, but you'll need spacers with fox bj's

killer5.0 · Feb 8, 2010

quick question for when i do the swap...do the sn95 balljoints just fit right into the fox stock spot...no problems?

Jaym14 · Feb 8, 2010

From what I understand they do but let's hear from someone who has done the swap before

Mustang5L5 · Feb 8, 2010

I don't have personal experience. I installed new Ford Racing A-arms when i did mine and just used the spacers.

Jaym14 · Feb 8, 2010

What exactly is improved on the ford racing a arms?

ball joints for 5 lug swap?

Jaym14

New Member

2000xp8

killer5.0

Jaym14

New Member

Mustang5L5

That is…until I whipped out my Bissell

killer5.0

Jaym14

New Member

Mustang5L5

That is…until I whipped out my Bissell

Jaym14

New Member

Similar threads

ball joints for 5 lug swap?

New Member

New Member

That is…until I whipped out my Bissell

New Member

That is…until I whipped out my Bissell

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency