• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Battery question...

  • Thread starter Thread starter cjman15
  • Start date Start date Dec 16, 2005

cjman15

Banned
Apr 15, 2004
1,009
0
0
Fairfield, PA
Dec 16, 2005
#1
  • Dec 16, 2005
  • #1
Soon I'm going to be putting my battery in the hatch and I plan on doing installing a high-powered stereo in the vacant space where my rear seat was. My question is how do I put in another battery for the audio equipment and hook it up to the alternator like the other battery. I also plan to upgrade the alternator to a 130 or 200amp in the near future. Also, if anyone has any suggestions or experiences of how/where you routed your battery cable from the engine bay to the trunk i'd appreciate it! Thanks alot

--cj
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Dec 16, 2005
#2
  • Dec 16, 2005
  • #2
I believe that you will have to run them in series... But I have never done it so you should look it up.
 

bynummustang

Seen my other Jackstand?
Jul 24, 2005
1
2
69
NC State University
Dec 16, 2005
#3
  • Dec 16, 2005
  • #3
Hit up ISKWEM or something in the audio section. He's a god with anything audio related.
 

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Dec 16, 2005
#4
  • Dec 16, 2005
  • #4
You'd need to hook the batteries up in PARALLEL (positive to positive, negative to negative). Voltage will remain the same, but current will increase.

As for running the battery cable to the front of the car, I just ran mine underneath the carpet and then drilled a hole and ran it through the firewall.
 

88Stangboy

Banned
Dec 12, 2005
342
0
0
Greenville, SC
Dec 16, 2005
#5
  • Dec 16, 2005
  • #5
Just curious, why are you putting the battery in your hatch? If it's to
gain a weight advantage, that stereo equipment is going to offset
any advantage you are going to get. If it's just to clean the under hood
up of the bulky battery, then by all means do it...just my .002....and just run the cable along the carpet on the drivers side and then through the firewall through a hole.....hope that helps....
 

cjman15

Banned
Apr 15, 2004
1,009
0
0
Fairfield, PA
Dec 16, 2005
#6
  • Dec 16, 2005
  • #6
Actually the stereo I'm putting in isn't that big of a setup... and I think I'm just going to stick with the one battery. The stereo is going in where the old rear seat used to be, so I don't see how it's going to be much of a difference as opposed to the weight of the car with the seat. I'd just rather have something good to listen to instead of a back seat (i hate driving people around)...

I've also seen people run the positive battery cable underneath the car and down the chassis of the car through a subframe connector... anyone ever do this?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 17, 2005
#7
  • Dec 17, 2005
  • #7
Rear mounted battery ground wiring. Follow this plan and you will have zero ground problems.

One 1 gauge or 1/0 gauge wire from battery negative post to a clean shiny spot on the chassis near the battery. Use a 5/16” bolt and bolt it down to make the rear ground. Use a 1 gauge or 1/0 gauge wire from the rear ground bolt to a clean shiny spot on the block.

One 4 gauge wire from the block where you connected the battery ground wire to the chassis ground where the battery was mounted up front. Use a 5/16” bolt and bolt down the 4 gauge engine to chassis ground, make sure that it the metal around the bolt is clean & shiny. This is the alternator power ground.

Crimp or even better, solder the lugs on the all the wire. The local auto stereo shop will have them if the auto parts store doesn't. Use some heat shrink tubing to cover the lugs and make things look nice.

The computer has a dedicated power ground wire with a cylindrical quick connect (about 2 ½”long by 1” diameter. It comes out of the wiring harness near the ignition coil & starter solenoid (or relay). Be sure to bolt it to the chassis ground in the same place as you bolted the alternator power ground. This is an absolute don’t overlook it item for EFI cars
 

GreatWhite

Member
Feb 24, 2006
232
1
17
Fairfield, PA
Apr 9, 2006
#8
  • Apr 9, 2006
  • #8
hey looks it's my old s/n... sad sad sad
 

cevtv

Founding Member
Sep 15, 2002
1,113
0
37
Massachusetts
Apr 9, 2006
#9
  • Apr 9, 2006
  • #9
srothfuss said:
I believe that you will have to run them in series... But I have never done it so you should look it up.
Click to expand...



To do it correctly, you need a battery isolator.



This will keep the batteries seperate, so that the main battery won't be drained along with the secondary - it also makes sure they each charge properly.




.
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Apr 9, 2006
#10
  • Apr 9, 2006
  • #10
i really don't see why anyone would put the battery in the hatch at all unless you're running it only in drag and you only need the battery for small amounts of time (and if you're gunna' do that, you might as well just put magnetos in it). Ya'll have any idea how much voltage is lost for every foot of cable there is? lol its insane
 
You must log in or register to reply here.

Similar threads

Electrical/engine bay harness questions
  • djj62478
  • May 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
479
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 6, 2026
djj62478
R
Electrical Trunk Mount Battery and Cut Off Switch- Need Help
  • Rcdgl
  • Nov 20, 2024
  • Fox 5.0 Mustang Tech
Replies
1
Views
399
Fox 5.0 Mustang Tech Nov 20, 2024
nickyb
Electrical Inaccessible starter solenoid from wire tuck, what are my options for an alternator upgrade?
  • AnthonyA1234
  • Jan 16, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
1K
Fox 5.0 Mustang Tech Feb 8, 2025
Mindseye007
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
555
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
A
Resolved Fuel Pump issue - test port jumped comes on (87 LX)
  • afjLX
  • Nov 16, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
3K
Fox 5.0 Mustang Tech Nov 26, 2024
afjLX
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?