Bbk 75mm Tb

Everyone has a problem with the TPS....but I installed a BBK 75MM TB about 6 months after my TF plenum....not one problem, idled just fine after install. :shrug: Apparently you guys are jacking up the TPS when you remove it lol.
 
Loosen up the 2 bolts on the TPS, start car, move the TPS to the right or left, adjusting by ear, or voltage if you have a meter. There is very little room for adjustment, but it can make a difference. Then tighten. Hope it helps.
2gts4us, I beat you to this one.
 
there is 2 bolts that holds TPS in place. u reinstalled it little off. So now your TPS is reading bit too low. So u need to get the TPS to 0.95+-.02 for your TPS to work correctly. when you losen those 2 bolts, u have ever so slight movement. u need to measure it as u move it.

after u get it right, u need to reset your PCM. after all is well, it'll idle funny for few days as PCM relearn your car