BBK intake manifold?

cenok is family · Aug 24, 2007

yeah 7 quarts is definitely better than 5. sweet, sounds like you're going to have a pretty bullet proof valve train after this. and yeah it sounds like the guy before you bought all comp products. the rockers might be 1.6's though. and are they the full roller pro magnums or just the magnums which are roller rip with a non roller fulcrum? either one is good, hopefully the pro mags though!

Ike83 · Aug 24, 2007

I'll have to find out right now.

Strype · Aug 24, 2007

deleted

Ike83 · Aug 24, 2007

So you're saying they're probably 1.6s. My buddy says they look like 1.7s, and he's seen about 3,456,987,234 sets of rocker arms in his day.

But he hasn't found any numbers on them yet. I'll keep ya posted.

Strype · Aug 24, 2007

deleted

Ike83 · Aug 24, 2007

Dude, I don't think my rocker arms would be knocking on my valve covers if they were 1.6s, so I'm going to put my money on the fact that they're 1.7s.

carbed87 · Aug 24, 2007

Ike83 said:
Are they really CRAP? Or are they just overpriced?

one guy said that so now everyone who doesn't have one or who has even seen one in person bashes them. i got a deal on mine ($580 with the TB) and it's a very nice piecs, i really hope they keep making them because im so sick of seeing nothing but typhoon and trickflow intakes on everybodies car...

Ike83 · Aug 24, 2007

Apparently Strype gives it the thumbs up, so maybe it's not THAT bad.

Anyway, I went with the Cobra just to be safe.

Ike83 · Aug 27, 2007

Well.....the numbers are in.

There will be no need to replace ANY valvetrain components, b/c the previous owner took it upon himself to ensure there would be no short-changing of money spent on it.

I already have the Comp Pro Magnum 1.7 rr's, so I'm waiting on my Cobra valve covers to arrive which will give them room to move instead of constantly knocking on the stock valve covers.

My springs are aftermarket and are in perfect shape, along with the rods and lifters. That, my friends, will keep a few bills in my pocket instead of in Summit Racing's.

The only thing I don't remember is which Competition cam I have. I'm not sure if it's the B-cam or the E-cam. It could've been the X-cam for all I know.

All I remember is that he told me it was the "big" one.

Anyway, I've added my new surprises to my signature, I'm just waiting on the cam verification. For now, I will assume it's the B-cam. I think that one is the bigger one if I remember correctly.

cenok is family · Aug 27, 2007

actually the letter cams (b303, e303, f303, x303, z303) are ford racing cams. i put them in "size" order too. that's cool that you already have all that stuff. saving money is always nice.

grey5.0beast · Aug 27, 2007

cenok is family said:
actually the letter cams (b303, e303, f303, x303, z303) are ford racing cams. i put them in "size" order too. that's cool that you already have all that stuff. saving money is always nice.

I thought the e was smaller than the b....

Ike83 · Aug 27, 2007

cenok is family said:
actually the letter cams (b303, e303, f303, x303, z303) are ford racing cams. i put them in "size" order too. that's cool that you already have all that stuff. saving money is always nice.

Well then I'll definitely have to call him and verify. It is a COMP cam so maybe I heard the numbers wrong.

cenok is family · Aug 27, 2007

grey5.0beast said:
I thought the e was smaller than the b....

i put them in order of lowest lift to highest. The E cam has more lift, but less duration than the B cam. that's why i put the parenthesis around "size". lol

Goober89 · Aug 27, 2007

this has been a helful thread guys...thx for posting all the info bout the RR,intake, and cams....you guys all rock and i havent found a better source of info than this site. Oh yeah and Ike83, good luck on the install and i hope your car is bad*** when done. lets see some pics when its done.

carbed87 · Aug 27, 2007

Ike83 said:
Anyway, I went with the Cobra just to be safe.

lol yeah, those BBK's have been known to steal your wallet when you not looking...

Ike83 · Aug 27, 2007

Not me....I'm too smart for that. Last time I checked, my wallet was right in my back p................

HEY! WAIT A MINUTE!

WHERE'D MY WALLET GO?

Ike83 · Aug 27, 2007

Goober89 said:
this has been a helful thread guys...thx for posting all the info bout the RR,intake, and cams....you guys all rock and i havent found a better source of info than this site. Oh yeah and Ike83, good luck on the install and i hope your car is bad*** when done. lets see some pics when its done.

Pics available in a week when the rest of my parts arrive and are installed accordingly.

Ike83 · Aug 30, 2007

Alright! Just got my 7 quart Moroso oil pan in, so that's everything.

By the way, +1 for Summit.

Anyway, my guy says that I probably do have a Ford Racing cam, so now I'm really confused. He says that Comp cams have the numbers up on the front of the cam, and there's no numbers on the front of mine. He believes it's the B303, but I'm still waiting on that.

On the otherhand, it'll probably be another week before it's all put back together b/c he's started on another car already while waiting for my parts to arrive.

But, it matters zero to me as long as it's done right.

COMING SOON: Cobra intake (ported lower), Cobra valve covers, Ford Racing mini-starter, Moroso 7 quart oil pan

stykthyn · Aug 30, 2007

If I found a decent used BBK at a good price I would get it, no way I would pay over 600 for one though. I love the way they look

cenok is family · Aug 30, 2007

stykthyn said:
If I found a decent used BBK at a good price I would get it, no way I would pay over 600 for one though. I love the way they look

yeah, that's about how i feel about it.

BBK intake manifold?

cenok is family

Ike83

Member

Strype

Cuthbert catcher

Ike83

Member

Strype

Cuthbert catcher

Ike83

Member

carbed87

Member

Ike83

Member

Ike83

Member

cenok is family

grey5.0beast

Cookies should never be DUNKED!!!

Ike83

Member

cenok is family

Goober89

New Member

carbed87

Member

Ike83

Member

Ike83

Member

Ike83

Member

stykthyn

I want to measure mine. It doesn't look that tall.

cenok is family

Similar threads

BBK intake manifold?

Member

Cuthbert catcher

Member

Cuthbert catcher

Member

Member

Member

Member

Cookies should never be DUNKED!!!

Member

New Member

Member

Member

Member

Member

I want to measure mine. It doesn't look that tall.

Similar threads

Privacy & Transparency

Privacy & Transparency