BBK or ACUFAB 75mm and MAF?

[hotdog71]

Hi All

Which if either is recommended from anyone that has changed there air intakes?
I am going to change mine on my 03 GT convt. and just wondered what you all thought about them?

Current mods:
4:10's Ford racing gears
Speed cal
MAC rear end cover.
Ally drive line
K&N
Steeda shifter (sweet)

 

[tomustang]

accufab's have better flow. DO NOT change your maf, an aftermarket one is worthless.

 

[btolenti]

accufab's have better flow. DO NOT change your maf, an aftermarket one is worthless.

....unless you are blown anyway....

 

[Jackie Chan]

look at my mods...btw my plenum and tb are 4sale

 

[tomustang]

well with his mods

 

[StangPro]

The dragon TB is the best bang for the buck. Less than $200.

We've never had an unhappy customer with them.

 

[Gearbanger 101]

The Accufab is a better built piece than the BBK. I've personally got a BBK and would buy another one. It's still a good quality piece, just that it's cast and not billet like the Accufab. Paid $163.00 for mine on Ebay through Brothers Performance.

 

[twogts4us]

The dragon TB is the best bang for the buck. Less than $200.

We've never had an unhappy customer with them.

Well, not the TB, but I've seen several posts from unhappy Dragon plenum owners, complaining of a nagging whistle caused, presumably, by the (turbulance reducing) divider.
Are we talking about just swapping the TB? Doing this without changing the plenum won't do much for performance, if anything at all.

 

[myponyrocks]

bang for the buck, go dragon or C&L best money can buy? Accufab, I am N/A with very few mods as the sig says, 75 mm accufab combo... no complaints here, cantwait till the snow stops so I can drive up to the same dyno to show gains

 

[Darkhorse845]

Yes keep your stock MAF and no question get the Accufab it's the best!