• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Before/After Window trim

  • Thread starter Thread starter Jekyl
  • Start date Start date Jul 3, 2005
  • 1
  • 2
Next
1 of 2 Next Last

Jekyl

New Member
Mar 31, 2005
93
0
0
Calgary AB
Jul 3, 2005
#1
  • Jul 3, 2005
  • #1
The rubber trim between the window and the door on my car was very deteriorated and was needed of replacement. i found two old foxbody doors behind my girlfriend's dad's garage and he sais I could take what I wanted from them. So I took the trim off which was like new and used it to replace my old, faded, hail-chipped, hard trim that was on my car.

These are the doors I took the trim from..


Before...





Comparison..


After




I found it fairly easy to do the swap. Took me about 20 min in total. Sorry for the crappy pic quality. I took them with my phone. Yes I know my car is filthy lol.
 

Attachments

  • trim26be.webp
    2.8 KB · Views: 128
  • trim12zj.webp
    2.8 KB · Views: 114
  • trim37vz.webp
    2.8 KB · Views: 111
  • trim43bq.webp
    2.8 KB · Views: 129
  • trim62ms.webp
    2.8 KB · Views: 109
  • trim74qv.webp
    2.8 KB · Views: 110
  • trim83ao.webp
    2.8 KB · Views: 131
  • trim51mu.webp
    2.8 KB · Views: 98
  • trim97kk.webp
    2.8 KB · Views: 137

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Jul 3, 2005
#2
  • Jul 3, 2005
  • #2
wow. Phone pic quality is getting amazing. Anyway, very nice job. Looks much better. Clean trim can really make a car look much better
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Jul 3, 2005
#3
  • Jul 3, 2005
  • #3
There was no need to take the mirror off, but you probably know that now. haha... Here are some pics of when I re did mine. Just some sand paper, some time, and some trim paint and they look new....

This was before...

View attachment 510408

This was my roof rail molding, and the door belt molding was just as bad...

View attachment 510410

And after door belt molding...

View attachment 510412

And roof rail molding...

View attachment 510413
 
K

Kerpal

New Member
Aug 9, 2004
400
0
0
Jul 5, 2005
#4
  • Jul 5, 2005
  • #4
Looks great.... I've been planning on doing mine soon. Any tips on removing the trim?

Wish I could paint everything off the car, but the black part of my window frame needs repainting too... so I guess I'll have to mask off the entire car...
 

the pony boy

Founding Member
Apr 19, 2002
358
0
16
10512
Jul 5, 2005
#5
  • Jul 5, 2005
  • #5
hey poop dawg is "trim paint"some thing u find in a regular parts store? thanks phil
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Jul 6, 2005
#6
  • Jul 6, 2005
  • #6
the pony boy said:
hey poop dawg is "trim paint"some thing u find in a regular parts store? thanks phil
Click to expand...
Yep. I used Duplicolor Black trim paint. It matched everything perfectly. If you use regular black paint, it will be really glossy, or too flat depending on what type you get. The trim paint matches good.
 

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Jul 6, 2005
#7
  • Jul 6, 2005
  • #7
how do you remove them, just snap them off?
 
A

Andres2882

New Member
Jan 29, 2004
316
0
0
Jul 6, 2005
#8
  • Jul 6, 2005
  • #8
Yah, *bump* for more info too. Only time I painted my trim it still seemed to have some "pock" marks in it and came out kind of rough. That trim looks great. Give us more info! Thanks
 

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Jul 6, 2005
#9
  • Jul 6, 2005
  • #9
I jsut painted my roof trim (above doors), looks SWEET!!!
Its just one screw (near front) and then you just pull it off, now i just need to paint the mirrors...

MY QUESTION:
HOW DO YOU REMOVE THE MIRRORS???
 

Curse

Member
Apr 8, 2004
791
2
16
El Paso, TX
Jul 6, 2005
#10
  • Jul 6, 2005
  • #10
I have wanted to paint my molding around the window for a while now. Thanks guys, I just got the motivation I needed.
 
M

megan_92

New Member
Jun 6, 2005
84
0
0
Perkasie, PA
Jul 6, 2005
#11
  • Jul 6, 2005
  • #11
my weather striping isn't that horrible but my car is currently at the shop getting repainted and i think a new paint job will make them stick out worse... is it worth buying all new weather stripping from somewhere like 50resto, or just sanding and painting them?
 
M

megan_92

New Member
Jun 6, 2005
84
0
0
Perkasie, PA
Jul 6, 2005
#12
  • Jul 6, 2005
  • #12
btw, Jekyl - i couldn't see your pics!
 
S

Scorcher2005

Member
Apr 17, 2004
883
0
16
South Carolina
Jul 7, 2005
#13
  • Jul 7, 2005
  • #13
megan_92 said:
my weather striping isn't that horrible but my car is currently at the shop getting repainted and i think a new paint job will make them stick out worse... is it worth buying all new weather stripping from somewhere like 50resto, or just sanding and painting them?
Click to expand...


you have weather stripping confused with the door moldings. Weather stripping is the rubbery/foam stuff in the door jams. the moldings are the plastic pieces. if yours are just faded, repaint them. If they are all cracked or chipped, you should get new ones. i wouldnt go to a parts place, just go to the junkyard.
 
M

mfewtrail

Member
Sep 3, 2003
82
0
6
North GA
Jul 7, 2005
#14
  • Jul 7, 2005
  • #14
super302 said:
I jsut painted my roof trim (above doors), looks SWEET!!!
Its just one screw (near front) and then you just pull it off, now i just need to paint the mirrors...

MY QUESTION:
HOW DO YOU REMOVE THE MIRRORS???
Click to expand...

Mirror Removal goes like this.

Remove the panel inside the car covering the area where the mirror is(it's a small trim piece held on by one screw).

Now you have two small nuts holding the mirror securely to the door(I believe they're 7mm in size, you might want to have a pen magnet around to catch the nuts as they're in a tight space and could be tricky to get out w/o dropping them down into the door......especially if you have large hands/fingers).

When you get to this point, you're going to need to use your power mirror button to move the mirror all the way up, all the way left, and all the way right. There are three screws located behind the mirror/glass itself, a standard/small phillips head screwdriver will work great here, just be careful around the mirror so you don't wedge it against the actual cover/housing and break the glass. After that, you just need to maneuver it in such a way that you can unplug the connector on it. Hope this helps!

EDIT: Forgot to mention(but you might know this already). After removing the nuts securing the mirror, you need to pull it out from under the door trim at the bottom of the window, just look under the mirror and you'll see the little piece on the mirror that slides under the trim.
 

BeerElf

Founding Member
Oct 16, 2002
85
0
6
Hillsboro, OR
Jul 7, 2005
#15
  • Jul 7, 2005
  • #15
So how did the door trim come off? Is it rivited, screwed, or just clipped on?
 

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Jul 7, 2005
#16
  • Jul 7, 2005
  • #16
thanks mfewtrail
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Jul 7, 2005
#17
  • Jul 7, 2005
  • #17
TTT for the door trim removal at the bottom....
 

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Jul 7, 2005
#18
  • Jul 7, 2005
  • #18
BlownStangGT said:
TTT for the door trim removal at the bottom....
Click to expand...
umm.....are you talking about the thing to the side of the seat with 4 screws
 

Numbles

Active Member
Dec 10, 2003
998
0
36
Chicago, IL
Jul 7, 2005
#19
  • Jul 7, 2005
  • #19
Anyone do their quarter window trim. Is that possible to take off easily and paint.
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Jul 8, 2005
#20
  • Jul 8, 2005
  • #20
super302 said:
umm.....are you talking about the thing to the side of the seat with 4 screws
Click to expand...


Im talking about the thing at th bottom of the window on the outside of the car the one he replaced to begin with, I know how to take the top one off
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Electrical ’86 Mustang – Power Windows/Locks Dead After Terminator X Swap
  • 5.0 Mike
  • Aug 21, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
230
Fox 5.0 Mustang Tech Aug 21, 2025
5.0 Mike
Door wire harnesses 1996 GT
  • Adizzle843
  • Feb 5, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
374
SN95 4.6L Mustang Tech Feb 17, 2026
Adizzle843
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
735
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
R
Door Ajar issue
  • ryjack70ss
  • Jul 25, 2025
  • 2010 - 2014 Specific Tech
Replies
3
Views
286
2010 - 2014 Specific Tech Jul 25, 2025
Noobz347
T
Convertible A-pillar weatherstrip issues
  • thiefofcheese
  • Oct 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
362
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 20, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?