Good point. It is the original stock pump, regulator and injectors. All of those are getting replaced so I'm hoping that will help.What fuel pump are you using at the moment? That could be your lean issue.
If u mean the black axle to diff brace it is SWARR AutoWhat tq arm set up is that?
I do have an adj. Clutch, control arms with poly bushings, Strange adj. Shocks and struts, 4.10's, and basically the full Stiffler,s system.had 4.10's in it and ran MT ET Street DOT bias out back and ET Front on skinnies at the other end.
not sure how much track time you intend on, or what the reasoning is for drag radial, but, I've found dr's to be a very frustrating experience with a 5spd and basic suspension. Best on dr's, 1.82 (walking the clutch out and the gas down in a tightly orchestrated dance... not easily repeatable/consistent) best on bias plys 1.64, drop the clutch at 5500rpm and let it eat.
If the dr's are for track only, and you are not going to an adjustable clutch, engine management system and sophisticated suspension, forget the dr and go bias.
That would be cool.Ideally I would like 17 inch drag radials on my Cobra replicas for the street and get my stock 15 inch turbine rears widend to 9 inchs and the fronts narrowed to 5 inch for big n littles at the track.
Agreed. Dr's don't like manual trans/track passes very well. But I only have used Nitto's. But they work fairly well on the street. As long as Bob remembers they aren't going to last very long(5-10k miles seems to be the avg) lol.that would be very cool. I though about doing that with a set of pony's.
By adjustable clutch, I'm talking about a McLeod soft lock or something similar, something you can dial in bite and slip, not a typical firewall adjuster and cable setup... or and engine management system that controls power off the launch.
Maybe you'll be able to get the dr's to work for you, but I found them way too inconsistent and frustrating and gave up on them. dr's simply do not like to be shocked the way a standard with with typical clutch/suspension set up works.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?