Best Cam, Rocker, Push Rod Set Up With 170cc Twisted Wedge

BradleyMustang3 · Apr 25, 2013

There it is gentlemen whats going to be the best set up if i go with the trick flow twisted wedge heads? or does anyone know of a head that will give me the same performance at a cheaper cost...either way cam wise e303? comp cams? crane? you tell me and i would imagine 1.6 rr

Noobz347 · Apr 26, 2013

There's not a ghost's chance in hell that I'd ever go with a letter cam after spending dough on aluminum heads.

Head over to FTI and fill out one of their cam sheets to see what they recommend. Or give Rick 91GT a call at RNH Performance and see what he thinks. http://www.rnhperformance.com/contact.htm

Rick is a member here. He builds motors and works with several cam manufacturers.

revhead347 · Apr 26, 2013

I wouldn't waste money on an alphabet cam either. If you have Trick Flow heads, then get a Trick Flow cam. They are cheap, and that's what they are there for.

Kurt

BradleyMustang3 · Apr 28, 2013

Hey guys i just picked up some used springs from a guy on craigslist that lives close and when i got there his garage was like a mustang part treasure trove he ended up asking me what i wanted to do and i told him aluminum heads and a cam he showed me a set of Canfield heads....when it comes to these numbers i have very little knowledge so maybe you guys could tell me if it would be a good deal and set up and what kind of compression i would be looking at

Canfield SBF Cylinder heads
192cc intake, 2.02-1.60 54cc combustion chamber, manganese bronze guide cut for 1.550 spring
valve diameters intake 2.020 exhaust 1.60

Canfield part number 20-450-54-0

and then has a comp cams cam

the cylinder heads are bare and i would need valves springs rockers and so on and so forth

what are your thoughts are these heads going to be tunable or are they gonna be less street friendly?

Thanks!!!

revhead347 · Apr 29, 2013

$800 for those heads is a good price bare. You are looking at another $500 for hardware, plus a little more for a valve job.

Kurt

Best Cam, Rocker, Push Rod Set Up With 170cc Twisted Wedge

BradleyMustang3

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

revhead347

Apparently my ex-husband made that mistake.

BradleyMustang3

Member

revhead347

Apparently my ex-husband made that mistake.

Similar threads

Best Cam, Rocker, Push Rod Set Up With 170cc Twisted Wedge

BradleyMustang3

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

revhead347

Apparently my ex-husband made that mistake.

BradleyMustang3

Member

revhead347

Apparently my ex-husband made that mistake.

Similar threads

Privacy & Transparency

Privacy & Transparency