biggjdogg headers good or bad?

Gixser · Sep 26, 2006

Does anyone know anything about these headers?
http://cgi.ebay.com/ebaymotors/1994...emQQcategoryZ33631QQihZ007QQitemZ170031344500
I am looking at three differnt sets.

BBK
Mac
or the Bigdogs?

Thanks

WHITE94COBRA · Sep 26, 2006

Look how thin the flange is on those!!!!!! those things will warp faster than my mind on a 8 ball of crack......

1TallMF · Sep 26, 2006

They don't mention if they are also coated on the inside, which is crucial. They are conveniently turned over in the pics so you can't see inside. I'd be cautious, you usually get what you pay for when it comes to ceramic coatings.

4Jenna · Sep 27, 2006

for the price doesnt look to bad

JJ95GTID · Sep 27, 2006

WHITE94COBRA said:
Look how thin the flange is on those!!!!!! those things will warp faster than my mind on a 8 ball of crack......

3/8" flange is the same thickness as BBK header flanges. Mine haven't warped. I'd say go ahead get 'em if you want. :SNSign:

EDIT: Headers are pretty worthless without the rest of the exhaust being replaced. The 4 catted H-pipe is the real flow restrictor in the exhaust setup. If you aren't doing the whole exhaust at once I highly suggest starting with replacing the H-pipe.

Killercanary · Sep 27, 2006

eades5.0 said:
for the price doesnt look to bad

I agree, I think I'd take a chance on them for the price.

Erich in AZ · Sep 27, 2006

If you end up with a set be sure to let us know how they work out.

SorsCode · Sep 27, 2006

For that price i would try them also. Worse come to worse put them back on Ebay
To me they look like a MAC header with a Flange.

gcomfx.com · Sep 27, 2006

Don't know which headers, but:

Good and fast shipping but problem with the fit of headers. Made fit.
Buyer heald4406( 0 )
Sep-01-06 10:27 Private
Reply by biggjdogg: Everyone that has ever installed headers know they are 95% time not direct fit?

Customer service looks a little "iffy" as well.

Gixser · Sep 27, 2006

well, I went and bought it, I will do a review with pics after I receive the headers

I am doing the whole system with spintech side draft exhaust, I need a new system to go with this New Kenne Bell I have coming

gcomfx.com · Sep 27, 2006

Sweet.... definately keep us posted. Do you have a rough time frame on when you plan to install them? I'm sure adding the Kenne Bell will bring rav header results.

I had planned on buying the Summit shortys, these would be a lot cheaper. Really interested to see the quality of the welds on the inside of the flange. Seen a pair similar at a Street Machine Nationals tent last year. The welds were a little poopy. Rewelding would mean getting them coated again.

Gixser · Sep 27, 2006

Looking at mid week next week to get the headers, I will include in depth pics and detail, Not sure yet as when I will install the KB,I have to come up with a few more parts still , Like the 42lb injectors ,90MAF and new fuel pump, Then Retune

4Jenna · Sep 27, 2006

Are you on any local boards?
I see your in Phx

Gixser · Sep 27, 2006

No, Please point me out to the local boards, I just bought My cobra 3 weeks and 14,000 dollars ago(6k for the Cobra and 8k on the go fast goodies)

I am in Avondale area,

Gixser · Oct 4, 2006

I just received the headers today, all looks good so far. The header install sheet says WYSCO on it, http://www.wysco.com/autoparts/autoparts-04.asp

this is what pulls up on Wysco...

anyway here are a few pics, Welds all look good, Plating looks to be nice and thick,Flang is VERY thick and straight, and the inside looks to be coated also, I only found one area I didn't like a small ding on one tubes, It may of been from shipping but I doubt it cause headers were packaged pretty solid

4Jenna · Oct 5, 2006

damn good buy!

1TallMF · Oct 5, 2006

Does it have the bung for the EGR tube? I don't see it...

Killercanary · Oct 5, 2006

eades5.0 said:
damn good buy!

I agree!!!

gcomfx.com · Oct 5, 2006

Woohoo! I may have found my new headers. I personally don't want the bung... just one more thing in the way. LOL

gcomfx.com · Oct 5, 2006

Wonder why the fox headers cost MORE?

http://cgi.ebay.com/ebaymotors/SB-F...emQQcategoryZ33631QQihZ007QQitemZ170034790087

I just emailed and asked... so we'll see.

biggjdogg headers good or bad?

Gixser

New Member

WHITE94COBRA

New Member

1TallMF

New Member

4Jenna

JJ95GTID

Active Member

Killercanary

The car that set the bar.

Erich in AZ

New Member

SorsCode

gcomfx.com

Gixser

New Member

gcomfx.com

Gixser

New Member

4Jenna

Gixser

New Member

Gixser

New Member

Attachments

4Jenna

1TallMF

New Member

Killercanary

The car that set the bar.

gcomfx.com

gcomfx.com

Similar threads

biggjdogg headers good or bad?

New Member

New Member

New Member

Active Member

The car that set the bar.

New Member

New Member

New Member

New Member

New Member

Attachments

New Member

The car that set the bar.

Similar threads

Privacy & Transparency

Privacy & Transparency