• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Billet Specialties - Street Lite Drag Wheels Arrived!!!

  • Thread starter Thread starter JohnnyGMachine
  • Start date Start date Jun 3, 2008
  • 1
  • 2
Next
1 of 2 Next Last
J

JohnnyGMachine

Member
Jun 19, 2004
123
5
19
Easton, Pa
Jun 3, 2008
#1
  • Jun 3, 2008
  • #1
Well, my Billet Specialties Street Lite drag wheels finally arrived!!! They look incredible! For right now I will be putting them on my 88 GT for a photoshoot but they will be going on the 85 Notch after that. I miss having the "bigs and littles" on my 85 Coupe and since I took the bullitts of it to go on the 88, and the 85 notch is going the direction of straightline performance.

I also have a pair of Nitto 555R Drag Radials 275/50/15s that will be mounted on the 15x8s for out back and I should have my skinny tires by the weekend and on the car. I can't wait.

Front - 15x3.5 with a 1.75" B.S.
Rear - 15x8 with a 5.5" B.S.

I went with these sizes because I know they just fit inside the fender wells with no clearance issues. I've run this exact wheel size/B.S. and tire sizes in the past on My 1985 Notch with Welds and they looked good and fit nicely. I don't like wheels sticking out in the back with the "jeep-look" (personal preference) also because most of my stuff is usually low and stock ride height. I admit I'm a freak about getting "the look" right on my rides and to me half the look of your car is wheel/tire combo and the ride height just right whether level or a slight rake.

I will post more pics and info on these once they are mounted on the car. Until then, check 'em out!











 

04fullitgt

I shower with poo
Nov 13, 2006
0
0
0
Crest Hill, Illinois
Jun 3, 2008
#2
  • Jun 3, 2008
  • #2
 

MrXCESSIVESPEED

Member
Mar 10, 2002
0
1
6
Maryland
Jun 3, 2008
#3
  • Jun 3, 2008
  • #3
They are beautiful wheels, was over a friends last night and he had two of the 15x8's there. Pulled one out of the box and i about fell outta the chair. I really need to switch to five lug..... good thing he didnt have a the 15x10's there!! Ohh man.
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Jun 3, 2008
#4
  • Jun 3, 2008
  • #4
Sick!
 
J

JohnnyGMachine

Member
Jun 19, 2004
123
5
19
Easton, Pa
Jun 3, 2008
#5
  • Jun 3, 2008
  • #5
I know Scott pretty well over there and mentioned that the 5.0 guys really could use a 15x9. I think they already know that and are looking into it. I know that I'd really like a 15x9 and be able to get about a 6" B.S. and that would be perfect for me. See what happens and I'll keep you guys all in the loop.

J
 

skunk21

Active Member
May 22, 2007
1,203
3
36
Taxachusetts
Jun 3, 2008
#6
  • Jun 3, 2008
  • #6




.
.
.
.
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Jun 3, 2008
#7
  • Jun 3, 2008
  • #7
Cobra Rs or ponys would look better. Kidding, nice to see some different wheels around here, they look sick. Can't wait to see them on the car.
 

TwoToneHatch

Active Member
Mar 22, 2007
170
2
28
New Jersey
Jun 3, 2008
#8
  • Jun 3, 2008
  • #8
I need 5-Lug now ! Those rims are sick !
 
J

JohnnyGMachine

Member
Jun 19, 2004
123
5
19
Easton, Pa
Jun 5, 2008
#9
  • Jun 5, 2008
  • #9
I had to stop by my buddy's shop for a minute and since I'm getting sooo impatient I rolled one of the rear wheel/tires out and took some pics. I rolled it in front of the back wheel on the car to get an idea....oooooh man! I should have the front tires mounted Monday and possibly pics posted up. Until then check these out...









J
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Jun 5, 2008
#10
  • Jun 5, 2008
  • #10
They look really good I am jealous.
 

just4bob50

Active Member
Apr 2, 2005
504
5
28
Pa.
Jun 5, 2008
#11
  • Jun 5, 2008
  • #11
Those wheels are awesome. i wanted to do a 5 lug swap and run them, but then I saw how much they cost!!! Maybe next year.

Love the wheels, but Im not sure about the gold stripe on the body molding though.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Jun 5, 2008
#12
  • Jun 5, 2008
  • #12
Do they have a 16x10?
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Jun 5, 2008
#13
  • Jun 5, 2008
  • #13
Yea a 15x3.5 is $210-220 not sure if i can forxe myself to pay that much for wheels.
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Jun 5, 2008
#14
  • Jun 5, 2008
  • #14
bentley429 said:
Yea a 15x3.5 is $210-220 not sure if i can forxe myself to pay that much for wheels.
Click to expand...

The same size draglite is $180 now. $30 really makes a big difference in my opinion.
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Jun 5, 2008
#15
  • Jun 5, 2008
  • #15
May be true but a nice set of used draglites or prostars is usually around $400 and the street lites cant really be found used yet(new is around $900). Usually with wheels I buy used to save some $$.
 
J

JohnnyGMachine

Member
Jun 19, 2004
123
5
19
Easton, Pa
Jun 5, 2008
#16
  • Jun 5, 2008
  • #16
...yeah I don't like the gold stripe either, it was on it when I got it. I wasn't going to modify this car since it's my daily driver so i bought the tomato red replacement stripe to go on it. Then I put the bullitts on it - red is out. I'd peel the gold off but it will take the paint off too so I'm just going to put black on it and call it a day.

Honestly the price for these wheels aren't really that much more than the Welds. Plus the 15x3.5 are MEANT for street use unlike what the sticker says on the outer hub on the Welds - "Not for street use..." I've had 1 friend slightly bend a 3.5" wide weld and I've seen Bogarts really get messed up being used on the street. The 15x3.5 Street Lites are even 1 lb. lighter and still stronger.

I mentioned the "not for street use" sticker on the 15x3.5 wheels to one of the guys from Billet Specialties and he laughed and asked why???

Anyways, I've had Pro Stars, and I've had Rodlites and these Street Lites are superior in quality and in my opinion look better. The center caps are a work of art all by themselves and are mounted with machined screws.
I also got them because they're new and different.

To each his own though

J
 
J

JohnnyGMachine

Member
Jun 19, 2004
123
5
19
Easton, Pa
Aug 16, 2008
#17
  • Aug 16, 2008
  • #17
Hey guys, got 'em on! Love 'em. Nice to have somethin' a little different the the rest of the crowd around here. I posted more pics and specs in the wheels sticky

http://forums.stangnet.com/716968-wheel-backspacing-offset.html



J
 

jd-hart

Member
Jun 29, 2005
124
1
16
Greensboro, NC
Aug 16, 2008
#18
  • Aug 16, 2008
  • #18
Looks sick...........
 

TweekedGT

New Member
Jul 22, 2004
1,274
0
0
Alberta
Aug 17, 2008
#19
  • Aug 17, 2008
  • #19
Damn those are sick. Looks totally badass man.
 
J

JohnnyGMachine

Member
Jun 19, 2004
123
5
19
Easton, Pa
Aug 17, 2008
#20
  • Aug 17, 2008
  • #20
...couple more I shot this morning.





J
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
414
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
Rear drums dragging
  • cnorman31
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
26
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 15, 2025
AeroCoupe
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
196
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
O
Good all around perfornace-ish tires?
  • optionizerSS
  • Jan 25, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
7
Views
350
2005 - 2014 S-197 Mustang -General/Talk- Jun 15, 2026
TPony
SOLD For Sale '92 LX Street/Drag car - WV
  • MikeyMustang
  • Apr 12, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Dec 31, 2025
MikeyMustang
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?