• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Blew a headgasket. rant.

  • Thread starter Thread starter nisreo
  • Start date Start date Jul 6, 2007

nisreo

New Member
Jul 22, 2006
178
0
0
Jul 6, 2007
#1
  • Jul 6, 2007
  • #1
Yea so just my luck, fun ford is in a month and I was hoping to have the mustang on the road and running well enough just to drive it and take it down the track a couple runs this year. Just to have some fun with it before the teardown this winter. Doesn't look like thats going to happen now.

I pulled the throttle body off and brought it to work to throw it in the parts washer, cleaned it all up nice nice. Put it all back together with a new gasket then a few minutes later white smoke starts pouring out of the tail pipes. Shut it down and pulled the dipstick, milky goodness.

So looks like shes going under the knife sooner than I had thought. Im pissed, but then again whatever, **** happens. Tune in to follow the progress this winter, Im sure Ill have a few questions and Ill be making some nice picture filled tutorials (as if there weren't enough already)

Maybe some day Ill get to drive a fox that I own.

/rant
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Jul 6, 2007
#2
  • Jul 6, 2007
  • #2
nisreo said:
Yea so just my luck, fun ford is in a month and I was hoping to have the mustang on the road and running well enough just to drive it and take it down the track a couple runs this year. Just to have some fun with it before the teardown this winter. Doesn't look like thats going to happen now.

I pulled the throttle body off and brought it to work to throw it in the parts washer, cleaned it all up nice nice. Put it all back together with a new gasket then a few minutes later white smoke starts pouring out of the tail pipes. Shut it down and pulled the dipstick, milky goodness.

So looks like shes going under the knife sooner than I had thought. Im pissed, but then again whatever, **** happens. Tune in to follow the progress this winter, Im sure Ill have a few questions and Ill be making some nice picture filled tutorials (as if there weren't enough already)

Maybe some day Ill get to drive a fox that I own.

/rant
Click to expand...

we did head gaskets on a 91 two weeks ago...took us 6 hours from start to finish with it being our first time doing it...
'
its not that bad...just take your time...
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Jul 6, 2007
#3
  • Jul 6, 2007
  • #3
You think that's bad...

I was testing out my new transmission after a 27-hour (total including undercarriage cleaning, various crap, external cooler setup, running to the store, running into stupid problems, etc.) installation, and raised a head off the block 1.5 days away from my dyno tune appointment!

Thankfully I had it towed to a friend's garage and we tore it down and put it all back the next day, timed it the morning after, and was off to the dyno to shred a blower belt

Anyway, just sayin' it could always be worse. Be glad it was now rather than a week or so out from FFW
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 6, 2007
#4
  • Jul 6, 2007
  • #4
I blew so many hg's on my svo that I did one starting at 7:30pm one night and then finishing it at 11:00pm the same night. I blew one on my 86 as well and did it in a good day of work, usually it takes about 6-7 hours for me.
 

nisreo

New Member
Jul 22, 2006
178
0
0
Aug 6, 2007
#5
  • Aug 6, 2007
  • #5
Well, the motor is all back together. I ended up taking everything to work and cleaning and painting it. All new top end gaskets and valve seals. lapped the valves blah blah.

Put it all back together, and its not running so hot. I pretty sure my cats are clogged from all the coolant and other crap that it was burning before. After about 20 mins of idleing, my drivers side cat is cherry red, pass side is normal.

The smoke is all gone now, but its still idling at 2000rpm and is lacking power.

could clogged cats be the cause of all this?

hey, at least the top end looks good.
 

Attachments

  • 100_1651.webp
    79.3 KB · Views: 176

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Aug 6, 2007
#6
  • Aug 6, 2007
  • #6
Well having a glowing cat is a sure sign that it's clogged....time to replace the mid pipe or go offroad.
 

fiveohwblow

Official Member
15 Year Member
Jul 21, 2005
2,169
145
155
Aug 6, 2007
#7
  • Aug 6, 2007
  • #7
In my experience plugged cats will also make the car not even run past an idle. Can cause different reactions, but it never hurts to eliminate em...
 

nisreo

New Member
Jul 22, 2006
178
0
0
Aug 6, 2007
#8
  • Aug 6, 2007
  • #8
thanks for the quick replies. Cats are going bye bye either way, but looks like theyre going sooner rather than later.
 

88_GT_5_oh

Sportin' a turbo 5.0 in Canadistan
Jul 4, 2004
1
0
1
WPG/MB/CA
Aug 6, 2007
#9
  • Aug 6, 2007
  • #9
blown head gaskets sucks.
 

nisreo

New Member
Jul 22, 2006
178
0
0
Aug 6, 2007
#10
  • Aug 6, 2007
  • #10
OT: hey 88gt, looks like we have the same color, do you know the name of it? I cant read my tag on the door, its been painted over.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Aug 6, 2007
#11
  • Aug 6, 2007
  • #11
sorry to hear about your luck Headgaskets have just become a simple thing for me! Dont worry about it man, its just part of the game we play
 

88_GT_5_oh

Sportin' a turbo 5.0 in Canadistan
Jul 4, 2004
1
0
1
WPG/MB/CA
Aug 6, 2007
#12
  • Aug 6, 2007
  • #12
nisreo said:
OT: hey 88gt, looks like we have the same color, do you know the name of it? I cant read my tag on the door, its been painted over.
Click to expand...

when i painted my engine bay i had it color matched and the color says "passion rose" lol. the previous owner repainted my car so i don't know anything other than that
 

nisreo

New Member
Jul 22, 2006
178
0
0
Aug 7, 2007
#13
  • Aug 7, 2007
  • #13
Modular2v said:
sorry to hear about your luck Headgaskets have just become a simple thing for me! Dont worry about it man, its just part of the game we play
Click to expand...

I figured it wouldnt be a big deal, and now that ive done them, theyre cake. Im sure I could do my next set in less than a day.
 
You must log in or register to reply here.

Similar threads

Cobra Brake Conversion - Spare Wheel/Tire Search
  • AeroCoupe
  • Aug 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
517
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 2, 2026
AeroCoupe
S
5.0 Rebuild
  • smittys7up
  • Nov 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 16, 2026
keel
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
780
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
M
Progress Thread mkk50's Progress Thread
  • mkk50
  • Aug 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2025
Noobz347
M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
840
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?