• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Blowby?

  • Thread starter Thread starter Bluemr24
  • Start date Start date Mar 18, 2007
B

Bluemr24

New Member
Feb 24, 2007
5
0
0
Mar 18, 2007
#1
  • Mar 18, 2007
  • #1
I have a new 331 na motor that is getting oil up into the throttle body, how does this happen? I took off the piping to the throttle body and there was oil all the way back into the throttle body. When I opened up the throttle body, more oil came out. Not like out of a hose, but enough to make a mess.
Whats up with this? Any suggestions?
Mike
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Mar 18, 2007
#2
  • Mar 18, 2007
  • #2
That sucks, is it all comming up from the PCV system?
 
B

Bluemr24

New Member
Feb 24, 2007
5
0
0
Mar 18, 2007
#3
  • Mar 18, 2007
  • #3
oil problem

I just found out from a friend who had the same Edelbrock Performer RPM ll intake on his 5.0 and he had the same problem, oil being sucked up into the throttle body, leaving a spot on the ground under the air filter. Whats up with this manifold?
Can I reduce the size of the hose from the pcv valve to the intake?
Can I re-do the whole system?
Mike
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Mar 18, 2007
#4
  • Mar 18, 2007
  • #4
What kind of VCs are you running and do they have a baffle under the fill hole. I had issues with oil being drawn up through the tube between the oil fill and the TB when I had to remove the baffle on my stock VCs to clear my roller rockers.

If the oil is in the TB it sounds like it is being drawn up that tube not through the PCV valve. If it is being drawn through the PCV valve it will end up in the upper plenum and down the intake runners not coming out the TB.
 

OrangeMustangGt

Founding Member
Mar 7, 2002
1,976
0
36
Cape Cod, MA
Mar 18, 2007
#5
  • Mar 18, 2007
  • #5
i would run a smaller line, and also install a catch-can. an aircompressor filter works well, thats what i use. I'm not familiar with those intakes, but can you use the metal screen below the pcv?
 
B

Bluemr24

New Member
Feb 24, 2007
5
0
0
Mar 18, 2007
#6
  • Mar 18, 2007
  • #6
ventilation

I'm going to try reducing the diameter of the big line from the back of the block.
The line from the oil fill goes directly to the side of the tb and its clean inside that.
That only leaves the big line from the block.
I'm hoping.
The valve covers are FMS Cobras, and they are baffled.
 
You must log in or register to reply here.

Similar threads

A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
293
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
D
For Sale 1993 Mustang LX for parts or restore
  • diesel farmer
  • Oct 6, 2026
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
421
Fox Body Mustangs For Sale (1979-93) Oct 6, 2026
diesel farmer
D
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?