Boat People
- Thread starter 25thmustang
- Start date
My summer toy,
Formula 272 w/ t 454's basic bolt-ons, 1500 watt stereo.
View attachment 227343
View attachment 227344
View attachment 227346
Formula 272 w/ t 454's basic bolt-ons, 1500 watt stereo.
View attachment 227343
View attachment 227344
View attachment 227346
MAC'n89Blckstng
Active Member
You bastard! That boat is sick! My buddy has a little 223 LS with a 454. I just custom painted his dash panels for it. Whats that thing GPS at?
I actually looked at a Scarab before buying this boat.
I have a love for speed, and love offshore boats. But for some reason I wanted a cruiser also, and between the two boats, this one worked out better (this one also had a trailer, the Wellcraft didn't).
To those non boat people, 50 on the water, is NOT 50 on the highway...
I have a love for speed, and love offshore boats. But for some reason I wanted a cruiser also, and between the two boats, this one worked out better (this one also had a trailer, the Wellcraft didn't).
To those non boat people, 50 on the water, is NOT 50 on the highway...
MAC'n89Blckstng
Active Member
no way, I went 120 on the water last summer in a 1800 horse turbine powered Eliminator cat and let me tell you, that was the most insane ride of my life. Speed on water is unbelievable!
YouTube - Lake Hopatcong Turbine Boat
YouTube - Lake Hopatcong Turbine Boat
Shaolin Crane
Banned
i have a built Twin turbo 383 chebby powered lavey craft, ****er goes 110+, not a fun ride in a boat not meant for that power
stprorolla49
Active Member
robo
Member
did someone say boat?
here's my fully restored 1975 searay 18 foot boat. i just got it together last oct. and it pushed 53mph on the gps the first time out. i know it has 0mph in it with some prop tuning.
the engine is a fully prepped 306. it has a roller cam, roller rockers, ported gt-40 heads, ported manifolds, thru transom exhaust, 7 qt. canton pan with a crank scraper, ported intake, 10.5 to 1 compression and a holley 650.
it sounds wicked!
here's my fully restored 1975 searay 18 foot boat. i just got it together last oct. and it pushed 53mph on the gps the first time out. i know it has 0mph in it with some prop tuning.
the engine is a fully prepped 306. it has a roller cam, roller rockers, ported gt-40 heads, ported manifolds, thru transom exhaust, 7 qt. canton pan with a crank scraper, ported intake, 10.5 to 1 compression and a holley 650.
it sounds wicked!
robo
Member
MAC'n89Blckstng
Active Member
Pics no worky! My buddy just bought a 76 Sea Ray 18 footer for 250 bucks with a torn motor, has a 302 so we figure you can find a 302 jsut about anywhere!
Small update. In an effort to turn around and get the boat water tight I have been working on scraping the okd caulk off the hatches. This turned out to be a lot more tedious than I thought. A previous owner had put caulk everywhere to try and seal them up, and I had to take it all off. It took two days of working a solid 4+ hours a day to get them ready to go back in. I sanded them up and painted them last night.
They should be going back in this evening, giving them a solid 24+ hours to cure before the rain gets here. I will also make sure to cover them after that, and let them cure for a bit longer.
After sanding:
One Coat:
Drying:
They should be going back in this evening, giving them a solid 24+ hours to cure before the rain gets here. I will also make sure to cover them after that, and let them cure for a bit longer.
After sanding:
One Coat:
Drying:
Similar threads
