• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Body Shop Fried My Clutch!!!!!

  • Thread starter Thread starter Jaym14
  • Start date Start date Jun 11, 2009
  • 1
  • 2
Next
1 of 2 Next Last

Jaym14

New Member
Jan 26, 2009
296
1
0
Long Island, N.Y.
Jun 11, 2009
#1
  • Jun 11, 2009
  • #1
Body Shop Fried My Clutch!!!!! New Pics Also

So today I got my car back from the body shop , where its been for the past few months. I had smacked up the front passenger side a little last December and decided that since I was getting that fixed I might as well go ahead and take the time to give the body a good once over and give the old fox a fresh coat of paint. I got a good deal because the body shop owner was a friend of a friend type of thing, but he took his sweet arse time finishing the job. So anyway, I pick the car up today and soon discover my clutch is completely shot!!!!! I don't know what these guys did but now I need to replace my clutch. I have a ram powergrip clutch which I've had no complaints about. My question is should I take a chance and replace just the disc or buy an entire new clutch set?? Everything seems fine (pressure plate and all other components) just the disc seems shot. I'm just worried that I might buy a disc and then end up needed something else that looks ok but really isn't. The body guy offered to help pay for it, and swears no one drove the car anywhere except in and out of the shop. I kind believe him but geeshhh... his employees need to learn how to not ride a clutch. Anyway, any thoughts, suggestions, or opinions would be helpful, Thanks. Below are some pics I snapped today with my iphone... sorry for poor quality, will get some better ones up later... cloudy day here too

Color is Orange Pearl, its a Nissan color used on the 350Z



 

daviszx3

Member
Jun 3, 2007
42
0
6
maryland
Jun 11, 2009
#2
  • Jun 11, 2009
  • #2
wow car looks great...sorry bout clutch
 

Jaym14

New Member
Jan 26, 2009
296
1
0
Long Island, N.Y.
Jun 11, 2009
#3
  • Jun 11, 2009
  • #3
daviszx3 said:
wow car looks great...sorry bout clutch
Click to expand...

Thanks... at least they got that part right!!! They did do nice work.. just need a sunny day to take better pics.
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Jun 11, 2009
#4
  • Jun 11, 2009
  • #4
resurface the fly wheel and buy a new clutch disc
 
G

GDTrumbo

Member
Jan 22, 2009
199
0
17
Nashville, TN
Jun 11, 2009
#5
  • Jun 11, 2009
  • #5
Better replace the press plate too. Chances are the plate is scored....

GT
 

1991notchbackLX

Active Member
Dec 25, 2007
1,483
47
48
New York
Jun 11, 2009
#6
  • Jun 11, 2009
  • #6
so, basically, every piece of **** in the body shop took your car out and did 5 burnouts and ground every gear in your transmission trying to "powershift"

that really chaps my ass man

here's what i do, works every time... when you bring your car somewhere to have work done, write down the odometer mileage! a shop should never put more than 1 single mile on your car pulling it in and out of bays to work on it, i tell them that i wrote the mileage down, and that if i come back to find any more than 1 mile on the car that i won't pay for the job

only one time has the shop owner turned me away because of it, most are pretty understanding and agree to my terms

if i were you i'd make those guys buy you a new clutch, and i'd have your tranny checked, because chances are if they don't know how to clutch they sure as hell don't know how to shift!
 

85SVOGUY

Member
Jan 21, 2009
76
5
9
socal
Jun 11, 2009
#7
  • Jun 11, 2009
  • #7
1991notchbackLX said:
so, basically, every piece of **** in the body shop took your car out and did 5 burnouts and ground every gear in your transmission trying to "powershift"

that really chaps my ass man

here's what i do, works every time... when you bring your car somewhere to have work done, write down the odometer mileage! a shop should never put more than 1 single mile on your car pulling it in and out of bays to work on it, i tell them that i wrote the mileage down, and that if i come back to find any more than 1 mile on the car that i won't pay for the job

only one time as the shop owner turned me away because of it, most are pretty understanding and agree to my terms

if i were you i'd make those guys buy you a new clutch, and i'd have your tranny checked, because chances are if they don't know how to clutch they sure as hell don't know how to shift!
Click to expand...


+1 on that. Even if they had it for 4 months pulling it in and out of a shop maybe 40 feet at a time shouldnt equal up to a mile. And for them to burn out your clutch.. seems sketchy.
 

Jaym14

New Member
Jan 26, 2009
296
1
0
Long Island, N.Y.
Jun 11, 2009
#8
  • Jun 11, 2009
  • #8
**Update**

So I ended up ordering an entire new Powergrip HD Clutch kit from Summit and I'm going to have the flywheel resurfaced. I'd rather be safer and not have to fix it twice.

I upgraded to 2nd day air shipping, will be here on Monday.

I was going to place the same order with late model, but they wanted $97.00 for shipping!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Summit charged me $30.00 Shipping for the same exact order with 2nd day shipping!!

I love latemodel but today Summit > Latemodel
 

Jaym14

New Member
Jan 26, 2009
296
1
0
Long Island, N.Y.
Jun 11, 2009
#9
  • Jun 11, 2009
  • #9
85SVOGUY said:
+1 on that. Even if they had it for 4 months pulling it in and out of a shop maybe 40 feet at a time shouldnt equal up to a mile. And for them to burn out your clutch.. seems sketchy.
Click to expand...

Agreed... I'm calling them today and letting them know how much they owe me
 

MAC'n89Blckstng

Active Member
Jun 11, 2003
1,012
4
36
NJ
Jun 11, 2009
#10
  • Jun 11, 2009
  • #10
The only time a car should be driven by a shop is when there is mechanical work done to it and of course driving it in and out of the shop. That sucks but its an excuse to make your car better. lol Car looks awesome too man, love the color.
 

DARCA

New Member
Nov 19, 2008
61
0
0
Tacoma, WA
Jun 11, 2009
#11
  • Jun 11, 2009
  • #11
Jaym14 said:
**Update**

So I ended up ordering an entire new Powergrip HD Clutch kit from Summit and I'm going to have the flywheel resurfaced. I'd rather be safer and not have to fix it twice.

I upgraded to 2nd day air shipping, will be here on Monday.

I was going to place the same order with late model, but they wanted $97.00 for shipping!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Summit charged me $30.00 Shipping for the same exact order with 2nd day shipping!!

I love latemodel but today Summit > Latemodel
Click to expand...

What happened to flat rate shipping?
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,538
233
Jun 11, 2009
#12
  • Jun 11, 2009
  • #12
How many miles did the clutch have on it? How does the disc look? Is the flywheel blued at all?
 

1991notchbackLX

Active Member
Dec 25, 2007
1,483
47
48
New York
Jun 11, 2009
#13
  • Jun 11, 2009
  • #13
yup, i forgot to mention that he car looks awesome with that paint color

i also wanted to share a story about a guy who i was talking to at a car show when we were discussing body shops... he brought his car in to have his rear bumper resprayed after a fender bender... he got a phone call a week later that it was TOTALLED, wrapped around a utility pole... by the DRUNK OWNER of the shop, at 4 am, 40 MILES from the body shop!!

that's why i HATE anyone touching my car haha
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Jun 11, 2009
#14
  • Jun 11, 2009
  • #14
laaammmeee...that's exactly why I do all work on my car myself.
 

67coupe

Founding Member
Apr 5, 2002
658
402
93
Huntsville, AL
Jun 11, 2009
#15
  • Jun 11, 2009
  • #15
The new color looks great.

Sucks about the clutch. I also write down my mileage and let the shop know. If possible, I also try to bring the car to them on empty.

When I had my body work done, the owner told me they couldn't test drive it because it was almost out of gas. I told him sorry, I didn't notice that when I dropped it off.
 

QUICK91LX

Founding Member
Dec 7, 2001
968
3
39
New Jersey
Jun 11, 2009
#16
  • Jun 11, 2009
  • #16
All you guys particular about mileage...it depends on the work being done if there is a road test involved, and many times by signing a work order you agree to allow them operate the vehicle for the purposes of testing and diagnosis. its in the fine print. More than 5 or 10 miles is more than sufficient for 99% of diagnosis and testing, if it is going to be more than that they should tell you what they are doing, but if it came down to the law, they do have a leg to stand on.
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Jun 11, 2009
#17
  • Jun 11, 2009
  • #17
QUICK91LX said:
All you guys particular about mileage...it depends on the work being done if there is a road test involved, and many times by signing a work order you agree to allow them operate the vehicle for the purposes of testing and diagnosis. its in the fine print. More than 5 or 10 miles is more than sufficient for 99% of diagnosis and testing, if it is going to be more than that they should tell you what they are doing, but if it came down to the law, they do have a leg to stand on.
Click to expand...

since when do they need to drive it to know where the body needs filler and not?
 

hsean

10 Year Member
Jul 24, 2006
656
69
69
dearborn,michigan
Jun 11, 2009
#18
  • Jun 11, 2009
  • #18
lets see some more pics of the car and interior as well and what color is that? it looks close to the corvette color.
 

Jaym14

New Member
Jan 26, 2009
296
1
0
Long Island, N.Y.
Jun 12, 2009
#19
  • Jun 12, 2009
  • #19
MAC'n89Blckstng said:
Car looks awesome too man, love the color.
Click to expand...

Thanks!!!

DARCA said:
What happened to flat rate shipping?
Click to expand...

Thats on standard UPS Ground Shipping.. not expedited shipping.

LaserSVT said:
How many miles did the clutch have on it? How does the disc look? Is the flywheel blued at all?
Click to expand...

Only About 1500.. but it did have a few Strip Passes on it and plenty of hard street Launches... HOWEVER, the Clutch was still grabbing just fine before I dropped the car off. As far as the flywheel goes, it looks ok, just the disc is shot really... but I'm having it resurfaced and installing a fresh clutch kit to be on the safe side.

1991notchbackLX said:
yup, i forgot to mention that he car looks awesome with that paint color
Click to expand...

Thanks!!!


67coupe said:
The new color looks great.
Click to expand...

Thanks!!!

ryan218 said:
since when do they need to drive it to know where the body needs filler and not?
Click to expand...

LOL

hsean said:
lets see some more pics of the car and interior as well and what color is that? it looks close to the corvette color.
Click to expand...

The color is called Solar Orange Pearl.. its a Nissan color used on the 350Z and perhaps other Nissan cars. It is very similar to the Corvette color. My car was originally Medium Cabernet Red. I plan on posting lots of pics (interior, exterior, engine) when I get it all back together with the new clutch and when we finally get some sun here... been raining for 3 days already

I'm surprised none of you guys noticed or asked about the lil old 9 sec maverick parked behind my car
 

MAC'n89Blckstng

Active Member
Jun 11, 2003
1,012
4
36
NJ
Jun 12, 2009
#20
  • Jun 12, 2009
  • #20
ryan218 said:
since when do they need to drive it to know where the body needs filler and not?
Click to expand...

if you read his post you would see that he said, for a road test that is needed and diagnosing purposes.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Fox In search of a Spec clutch dimension.
  • PonyGTrider
  • Jun 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
139
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 3, 2025
PonyGTrider
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
192
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
79
The Welcome Wagon Jul 3, 2026
5150K
5
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
1
Views
623
Drivetrain Parts Dec 26, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?