Brake booster and M/C question...

[Vinnietbird]

How can an SN-95 booster and M/C be adapted to a Fox car? My M/C has three lines going to it,and the SN-95 has two. Al;so,will the booster physically fit?

 

[Mustang5L5]

The holes in the firewall need to be slotted to get a sn95 booster in, or you can get a 1993 cobra booster which is the same but with a fox stud pattern. You still might need to slot as it's a physically larger booster,

As for the mc, you need a 3-2 conversion to run a two port mc. There are a few different ways to do this.


But it can be done. I have them in my car with cobra disk brakes

 

[Vinnietbird]

Do you have a link for the 3-2 conversion? As in,what I need to buy? Thanks.

 

[Mustang5L5]

Well, which one to buy depends on what brake setup you are running.


Maximum Motorsports, the Latemodel Mustang Performance Suspension Leader! sells the 3-2 kits.

 

[Vinnietbird]

From what I could tell,those are for manual brakes,I'm not doing that.The link was the home page.What exactly am I looking for?

 

[Shaolin Crane]

not for manual brakes, a 3-2 port conversion will work regardless of assisted or manual

 

[Mustang5L5]

Site won't let you link to the specific page.

Click "brake upgrades" and then "master cylinder upgrades"

Then, which kit you buy depends on which master cylinder you use and that depends on what brakes you install.

 

[Vinnietbird]

Thanks a lot.I appreciate the assistance.