Brake Lines and Fittings Questions

[Adam95GT]

My threads of my soft lines seem to have gotten dust dirt and paint over the last two years... New lines are $20 each side at autozone...

I need the thread size on each of the fittings that goes from the hard to soft lines. So i can try to clean them and buy new fittings...

If i cant clean them out anyone know a cheap stainless kit.

All the ebay ones say cobra... im not sure if there is a difference... a Russell kit would be nice.

 

[Adam95GT]

ttt

 

[Adam95GT]

Does M10x1 and M12x1 sound right to you guys...

 

[Chythar]

The rear soft lines are identical for the GT and Cobra. The V6 uses the same caliper hoses, but the center hose is different. The Cobra kit will work fine for you. Maximum Motorsports has s/s kits for our cars.

 

[Adam95GT]

The rear soft lines are identical for the GT and Cobra. The V6 uses the same caliper hoses, but the center hose is different. The Cobra kit will work fine for you. Maximum Motorsports has s/s kits for our cars.

Talking about the fronts here. I think the cobra has a different style on caliper side then the GT's

Im looking at this:

Russell Street Legal Brake Line Kits 693020

or stock lines... im pretty sure the fittings are m10 and m12 ill have to call maximum or something to confirm.

I just figured with a line lock its better to run the stainless

and i mean i need to buy lines unless i can clean up these threads.

 

[Chythar]

Sorry, didn't see that you were looking for the fronts. Gt and Cobra are different on the front. The kit you found is correct for the GT. here's Russell's part listings for domestic cars:

Russell Performance - Domestic Brake Hose

I don't know the sizes of the fittings, sorry.

 

[Adam95GT]

FYI for anyone looking the sizes i thought are correct.

Drivers side is m12x1 with a bubble flair
Pass side is m10x1 with a bubble flair