Brembo Brake Kits

[jegg]

My front stock rotors are warped so I might as well upgrade. Anyone know where I can buy a 13 inch brake kit for a 2004 GT that comes with solid rotors?

 

[darkside03gt]

www.buyfordracing.com. you can upgrade to the cobra/bullitt/mach1 kit for cheap the kit even comes with SS brake lines. you can also upgrade the rears for another 175 comes with rotors too. I would upgrade now becuase the price of these kits is always going up. the mach1 kit was only 329 when i bought it and its already 359.

 

[jegg]

www.buyfordracing.com. you can upgrade to the cobra/bullitt/mach1 kit for cheap the kit even comes with SS brake lines. you can also upgrade the rears for another 175 comes with rotors too. I would upgrade now becuase the price of these kits is always going up. the mach1 kit was only 329 when i bought it and its already 359.

I considered these kits but I decided i didnt like how they have "cobra" or the running mustanf stamped into the calipers. I also, dont like the "brembo" on the brembo calipers but seem easier to get rid of since they look powder coated or painted on. I just want an all solid gloss black finish on them.

 

[darkside03gt]

then get the mach1 kit. it has no lettering or symbols or anything and its cheaper then the cobra/bullitt kits. its the same calpers too. its by far the best mod i've done yet.

 

[darkside03gt]

look here. http://www.buyfordracing.com/shop/product_info.php?products_id=594cPath=6

 

[jegg]

look here. http://www.buyfordracing.com/shop/product_info.php?products_id=594cPath=6

Thanks! I'll look into these. Does this kit come with pads? It doesnt say.

Edit: Nevermid it does come with pads....I'm losing my mind ...

 

[jegg]

Does this kit come with everything needed to bolt right up to my '04 GT?

 

[urban96]

Does this kit come with everything needed to bolt right up to my '04 GT?

yup, only thing you need to buy is brake fluid

 

[Mustang5L5]

Does this kit come with everything needed to bolt right up to my '04 GT?

Yup, all you need is fluid.

They perform very well too. Keep in mind only the rotors are made by Brembo. The 2piston calipers are made by PBR.

Here are my Mach 1's painted red

When you bleed the brakes, make sure you bleed the MC bleeders as well. Somehow they ALWAYS get a bit of air up there. It happens every time i crack the front driver's side line open