I broke the plastic clip that connects the CC cable to the TB. Can just the plastic clip be replaced? (it doesn't look like it) I purchased a replacement on-line from a junkyard and they sent the entire CC system? I don't need CC that bad if it requires changing the entire system just for a plastic clip.
KamiKaziDK
Member
+1 My CC clip has been broken for years, I had it ghetto rigged for about 6 months at the beginning and that eventually gave out, never really gave it that much thought though cause I rarely use it, but I also like everything on my car to work
wmorris132
New Member
- Oct 9, 2006
- 13
- 0
- 1
I got one from a junkyard for a buck. The clip comes apart and allows the cable to come through. It has a factory crimp on the cable you will need to cut to get the broken connector off. Slide the new one on and crimp or clamp the cable with something ( I used one for a bike cable). Put the cap back on the connector, clip it to the throttle body and you're done. Good luck.
Ok, thanks, I'll give it a shot. I have the stuff to do it, I thought it would be to short if I cut the crimp off.
KamiKaziDK
Member
That was my thought also. I guess you could be very careful and dremel it off though too if that was the case, I'll have to take a look at it