• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Broken water pump?

  • Thread starter Thread starter xexitenglishx
  • Start date Start date Jun 29, 2006
X

xexitenglishx

Member
Jun 27, 2004
153
0
16
Jun 29, 2006
#1
  • Jun 29, 2006
  • #1
I just got an HP turbo kit installed on my 87 5.0. I got it back from the shop and the radiator sprung a leak and it had to go back. I finally got my car and it appears the water pump is not pumping or there is some type of clog. When the car idles the temp will continue to climb all the way up past 200*. Im monitoring this from my tweecer and not the guage on the car, which also shows the temp increase though. When i feel the top radiator hose it doesnt appear to have much pressure in it but once the car starts to get really hot the coolent overflows out of the overflow and is almost boiling. Could this be the water pump or something else? I know the turbo is putting out alot of heat but it cant be this much. The water pump is not leaking from anywhere that i can see it just leaks out of the overflow and some steam comes from the radiator cap. Anyone have any advice?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 29, 2006
#2
  • Jun 29, 2006
  • #2
Are you sure the t-stat is working as it should (not sticking)?

Good luck.
 
X

xexitenglishx

Member
Jun 27, 2004
153
0
16
Jun 29, 2006
#3
  • Jun 29, 2006
  • #3
I dont know..Where is the t stat located? is it easy to get to? Thanks
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 29, 2006
#4
  • Jun 29, 2006
  • #4
The T-stat is under the waterneck, which is what the upper radiator hose connects to on your lower intake.

Other thoughts: was the radiator cap tested or replaced (regarding bubbling coolant in the overflow)?

And is all the air out of the system? If not, the sensors can read off and the stat might not open as soon as it should (steam pockets).

Good luck.
 
You must log in or register to reply here.

Similar threads

Engine Standard or hi flow water pump?
  • AnthonyA1234
  • Sep 28, 2026
  • Fox 5.0 Mustang Tech
Replies
16
Views
432
Fox 5.0 Mustang Tech Oct 9, 2026
2000xp8
Flushing water from the radiator and block.
  • djj62478
  • Oct 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
272
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 11, 2026
CAMTWO1070
K
86 GT Water Pump
  • Kade5114
  • May 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
228
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026
nickyb
Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
B
99 mustang gt 4.6 excess cooling system pressure
  • Blackbeauty99-4.6
  • Nov 11, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
81
SN95 4.6L Mustang Tech Today at 12:47 PM
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?