Broken water pump?

xexitenglishx

Member
Jun 27, 2004
153
0
16
I just got an HP turbo kit installed on my 87 5.0. I got it back from the shop and the radiator sprung a leak and it had to go back. I finally got my car and it appears the water pump is not pumping or there is some type of clog. When the car idles the temp will continue to climb all the way up past 200*. Im monitoring this from my tweecer and not the guage on the car, which also shows the temp increase though. When i feel the top radiator hose it doesnt appear to have much pressure in it but once the car starts to get really hot the coolent overflows out of the overflow and is almost boiling. Could this be the water pump or something else? I know the turbo is putting out alot of heat but it cant be this much. The water pump is not leaking from anywhere that i can see it just leaks out of the overflow and some steam comes from the radiator cap. Anyone have any advice?
 
The T-stat is under the waterneck, which is what the upper radiator hose connects to on your lower intake.

Other thoughts: was the radiator cap tested or replaced (regarding bubbling coolant in the overflow)?

And is all the air out of the system? If not, the sensors can read off and the stat might not open as soon as it should (steam pockets).

Good luck.