Buying a intercooler. Does it matter if its for a turbo or supercharger?

MustangOwner · Aug 29, 2007

FastDriver said:
No. In a street car, you need to go air-air. Air-water is a no go unless it's one of those old air-water-air, which is still dumb to me.

And whats the reasoning that you can't run Vortechs Power cooler Air 2 water? I'm going to call them tomorrow and see if its street worthy or not. But whats your reasoning to say its "no go"?

85_SS_302_Coupe said:
The problem is that a "one size fits all" kit has to be able to fit every car....you'll get a cleaner install with a custom pipe routing, but that' might cost a little more.

So far i've only found 2 kits. Powered by BTI 87-93 intercooler air 2 air kit and Vortech's 87-93 Power Cooler Air 2 Water. Both are clean installs. Here is a picture of both... The Vortech kit is small, clean, simplie, and nice. BTI's on the other hand is big, long, hard work, and alot of hacking up....

But BOTH kits will allow me 2 run my Anderson Ford Motorsports Power Pipe as well. I just like the vortechs.. so easy lol.

View attachment 366816

View attachment 366818

View attachment 366820
^^^ LOOK at the f-ing monster. As sweet as that looks i don't think my Saleen lower valance would fit over that!

85_SS_302_Coupe · Aug 29, 2007

I dunno man, i think you might have to trim some of the back of the valance but i bet you it would fit.....and DAMN would it look SIIIIIICK! Also that probably could've been hidden a little better than that.

MustangOwner · Aug 29, 2007

85_SS_302_Coupe said:
I dunno man, i think you might have to trim some of the back of the valance but i bet you it would fit.....and DAMN would it look SIIIIIICK! Also that probably could've been hidden a little better than that.

Thats what i thought...but that was the car the actual company installed though so? I'm not sure you could. Idk the way my saleen lower valance fits on there it would have to be all cut of

MustangOwner · Aug 29, 2007

BLOWN 5.0 FOX said:
thats how i did mine. But there is more than one way to skin a cat!

ooooooo i like. Can you give me more information? Did you buy the kit? or make it yourself? Also looks like you change the direction of the tube that runs into the blower. Normally it faces the intake but yours is facing the passenger side fender...hm i need more info. I like it though. What boost loss did you see?

MustangOwner · Aug 30, 2007

blown 5.0 more info

MustangOwner · Aug 30, 2007

I just called Vortech and asked them about their "power coolers" and they said that they are very adequate on the street. All you do is check the cooler once a week. Its like a radiator. I think i'm gonna go that route. Plus i found a guy that put down 589 rwhp on the stock block with s-trim and intercooler. I like those #'s lol.

poneypower89 · Aug 30, 2007

Can someone link me to a place that sells the BTI Kit? I kinda wanna see more of this.

MustangOwner · Aug 30, 2007

poneypower89 said:
Can someone link me to a place that sells the BTI Kit? I kinda wanna see more of this.

Sure why not. I like the idea and it looks really clean... but i couldn't cut up my front bumper and saleen valance.

Here is more pictures of the fox setup. If you want to see other stuff just go back to their home page...
http://www.powerbybti.com/foxgallery2.htm

And talk about rock rips, wait till a rock gets thrown right throw the core!

Buying a intercooler. Does it matter if its for a turbo or supercharger?

MustangOwner

Banned

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

MustangOwner

Banned

MustangOwner

Banned

MustangOwner

Banned

MustangOwner

Banned

poneypower89

Now everyone in the world will know I wanna bang t

MustangOwner

Banned

Similar threads

Buying a intercooler. Does it matter if its for a turbo or supercharger?

Banned

it sucks (I know) to be on the receiving end

Banned

Banned

Banned

Banned

Now everyone in the world will know I wanna bang t

Banned

Similar threads

Privacy & Transparency

Privacy & Transparency