C4 Swap

srtthis · Jun 23, 2014

4 of the 10 studs are in... battery in my impact died and i dont have that charger at my house.
but the tires are mounted the rotors are on the car...

84Ttop · Jun 23, 2014

You couldn't design a charger on the fly? I'm sure you had bubble gum and duct tape in the garage.... McGyver would have done it

srtthis · Jun 23, 2014

no he couldnt... would need his swiss army knife

srtthis · Jun 29, 2014

Had to cut the stock center cap to get one wheel off...

But they are on. New pads will be here tomorrow and I will bleed the brakes

srtthis · Jun 30, 2014

1 wheel down

84Ttop · Jul 1, 2014

Is this project done yet?

srtthis · Jul 1, 2014

if it wasnt for the small easy stuff i would have been done months ago

srtthis · Jul 16, 2014

in no ones noticed my motovation level and free time level is pretty much nothing these days. between racing work and everything else my car has been getting the red head step child treatment

Bullitt347 · Jul 16, 2014

On the bright side..................if it ain't running, it ain't breaking down

srtthis · Jul 16, 2014

true... but i also aint going fast!

A5literMan · Jul 16, 2014

I feel the same way. I just haven't had the time/desire to work on mine either! Idk why!? I actually haven't even drove mine this month(even though I could) !

srtthis · Jul 17, 2014

loading this big bitch up has taken all my free time. didnt get home till 3am last night and up at 5:30 for work

Bullitt347 · Jul 17, 2014

srtthis said:
loading this big **** up has taken all my free time. didnt get home till 3am last night and up at 5:30 for work

Such is the life of glory lol!

srtthis · Jul 17, 2014

glory??? we aint won yet! lol

srtthis · Jul 19, 2014

Mostly wired up got a few things left to do. Major issue with the nitrous stuff not turning on. But shifter is in and adjusted. Pretty much just need to put fluid in it now

srtthis · Jul 24, 2014

more set backs as some of you on facebook saw... the trans leaks between the extension housing and the main case. im going to pull it apart in the car and seal it up. hopefully the guy who built it just forgot to put a gasket in it or something stupid. pulling the headers isnt something i really want to do right now

srtthis · Jul 24, 2014

Welp no gasket or sealer... took a type F bath though

Going to clean up the housing and throw her back together tomorrow. Hope to have everything done by Sunday night

srtthis · Jul 29, 2014

well it cranks over... so all the safety switch crap is bypassed.

need to put the steering shaft back in driver seat and the drive shaft...

and figure out whats going on with the nitrous stuff

srtthis · Aug 3, 2014

She starts she runs... hoping to get it out and drive it this week before I leave for vacation. It actually idles better now than when it had the 5 speed

Noobz347 · Aug 4, 2014

Sweet... Then we'll need to address the fail that is your avatar.

C4 Swap

the guy doing it does every local racers rear end

Attachments

They make new pistons every day, so why worry?

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

Attachments

the guy doing it does every local racers rear end

Attachments

They make new pistons every day, so why worry?

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

I have been doing it wrong this whole time

the guy doing it does every local racers rear end

At least it is lumpy...

the guy doing it does every local racers rear end

Attachments

I have been doing it wrong this whole time

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

Attachments

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

Privacy & Transparency

Privacy & Transparency