I have a 91 GT hatch. I just got a set of gt40p heads and mountaineer intake at the JY for 50 bucks!!
I have a few questions, First any suggestions on valve springs for around 100 bucks that will work with a TFS1 cam?
ALSO is it possible to run the TFS2 cam with this setup, and worth anything to do this over the TFS1? I imagine the piston to valve clearance would be close? Any thoughts? Thanks
I have a few questions, First any suggestions on valve springs for around 100 bucks that will work with a TFS1 cam?
ALSO is it possible to run the TFS2 cam with this setup, and worth anything to do this over the TFS1? I imagine the piston to valve clearance would be close? Any thoughts? Thanks